58 yongnuo ring flash on offer

Versatile Lighting Controls A dual-flash-tube design with a separate brightness control system, it allows you to either fire both tubes simultaneously, or each at a time, adjusted from full power to 1 128 at 1 3 stop increments to create light to dark ratio, achieving uniform lighting of your subject when taking high sensitive photos.

Main functions Lamp A flashing Lamp B flashing AB Lamp

(Practical) With LCD display for convenient operation

Zoom range - auto, 24, 28, 35, 50, 70, 80, 105mm

Box contents Yongnuo YN-14EX macro ring flash; adaptor ring (52, 58, 67 and 72 mm); protective case, instructions

The aperture blades up to 7 pieces,which allows you able to shoot the near-circular diffuse plaques,appropriately narrow the apertures can shoot the 14 astral effect.

The YN216 adopts 216 high-quality LED lamp beads of extra-large luminous chips, the brightness can completely satisfy the requirement of various environment, thus the camera light can be dimmed accurately and reliably, the light spot is more evenly and the service time is longer.

1.Supports Master TTL Flash Supports Exposure Compensation, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu accessible.

S2 holder can be tilted infinitely

High GN, Supports M, TTL Flash GN18. Supports M, TTL flash ratio setting, adjusting flash ratio of flash tube A and B or making only one flash tube flash can produce shadow on the subject, which enables the photo reach sculptural effect.

LARGE-SIZE LCD DISPLAY Equipped with large-size LCD display, the flashing function can be checked and set more clearly and visually,which will be more convenient for use.

Main functions Lamp A flashing Lamp B flashing AB Lamp

Supports FEC, FEB, Front and Rear-curtain sync, FE lock, Modeling Light, support for Canon camera menu accessible.

Yongnuo Macro Photography Flash with TTL System for Canon

Box contents Yongnuo YN-14EX Macro Ring Lite Flash Light; 4 x adapter rings; protective case; instruction manual (English language not guaranteed)

YN560 IV YN560III+YN560-TX, Supports Wireless Master Function.

Supports Wireless Optical Slave function, equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface.

Compared with YN560-TX, YN560TX II is lighter, smaller, easier to lock in flashes.

M TTL Flash Supported Support Exposure Compensation, FEB, Rear-curtain sync, FE Lock, Modeling Light, menu access to Canon camera.

Using global free FSK 2.4GHz wireless channel which can be suitable in many countries. Support Yongnuo RF-602,RF-603 Transmitter.

Adding the power switch for single transmitters

The aperture blades up to 7 pieces,which allows you able to shoot the near-circular diffuse plaques,appropriately narrow the apertures can shoot the 14 astral effect.

Yongnuo YN560. Width 60 mm

Zoom range - auto, 24, 28, 35, 50, 70, 80, 105mm

It supports remote controlling with remote controller, wireless controlling with mobile phone ( supports Android 4.3 and bluetooth 4.0 version and above IOS7.0 and iPhone4S and above mobile phone ) and group controlling the luminous intensity of YN300 III etc.

YONGNUO

The infrared remote control is configured, so the brightness and power switch can be adjusted away from the machine.

YONGNUO

GN58@ISO100,105mm, manual flash, new LCD Screen, 8 levels of output control (1 128 1 1), 29 levels of fine tunin, with built-in Trigger System, YN560 IV YN560 III + YN560-TX II

Yongnuo 300II has 150pcs LED lamps 3300k and 150pcs LED lamps 5500k

Rich colour types Provides RGB full colour, composed of gorgeous RGB full colour mode and natural 3200 K, 5000 K colour temperature mode.

Flash guide number 58 (at 105mm, ISO 100)

The YONGNUO speedlite transmitter YN-E3-RT II is a transmitter for wireless flash shooting. It can control up to 5 groups(15 units) of speedlites that have a wireless multiple flash shooting function using ratio transmission.

With overheat protection, adjustable power saving mode

Box contents Yongnuo Speedlite YN-560 Mark III; Stand; User Manual (English); diffuser

Automatically save settings, supports custom settings (Fn).

Box contents YN565EX II flash unit, protective case, base, manual (cannot guarantee that this will be in English)

In the optical transmission flash shooting, the YN600EX-RT II can be used as master unit to trigger the YONGNUO and Can0n EX series flash (excluding the YN585EX), supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash.

Support using NP-F lithium battery or external 8V, 5A DC power. Adopt LED constant-current driving technology for light supplement.

Circuit design Insulated Gate Bipolar Transistor(IGBT)

fully supports YN560-TX,RF-603(I II),RF-602

Supports autofocus and manual focus mode;

Contents Yongnuo YN-560 Mark III; stand; user instructions in English and Chinese.

GN31 @ ISO100 105mm;YN320EX supports TTL flash and High-speed Sync (HSS). The maximum sync speed is up to 1 8000s. Adopts two AA batteries power supply design, The recycling time for full output just takes 2s, you won t miss any splendid moment.

YN565EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera; GN58@ISO100 105mm, support TTL, M, Multi flash.

It transmits all the settings in External Flash Menu of your camera to remote flash(es), you can control flash(es) through camera menu. It supports TTL function. LCD screen display, multi-buttons quick operation. The firmware can be upgraded through the USB interface.

In the optical transportation wireless flash shooting, the YN568EX III can be used as a master unit to trigger YONGNUO and C's EX series speedlite(except the YN585EX), and supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash.

Compatible with YN622N(master slave) and YN560(slave) Wireless System When YN968N is used as master unit, it can control and fire YN968N YN622N(II) YN685N being slave unit. When YN968N is set as YN622 (slave mode), it can received control signal or trigger signal from master unit YN968N YN622N(II) YN622N-TX, and achieves slave flash in TTL M Multi mode. When YN968N is set as YN560 (slave mode), it can receive control signal or trigger signal from YN560-TX (II) RF603 (II) RF605, and achieves fla

Supports Nikon Optical Transmission Wireless Slave Flash A YN565EX III can record the master unit of YN600EX-RT II (YN568EX II), YN568EX III, 600EX (II) -RT, 580EX II (SB910 900 800 700). In Flash C command, external TTL and manual flash and strobe flashes are realized.

Can be used as a YN622N II control panel and LCD panel YN685 can be set to 622 EXT.LCD trigger mode and then installed on the YN622N as a control panel and LCD panel.

Sound prompt system & flash head electric zoom.

GN18@100m, TTL and M Mode GN18@100m, supports TTL and Manual function, support Fn Customs Setting, flash ratio can be adjusted, there are 8 levels (1 128-1 1) for the intensity adjustment for the flash control, total 22 levels fine tuning; the tube A and tube B can flash individually, the flash index is wider and more practical.

New power zoom function, large LCD panel

Supports Auto Manual Zooming, USB Firmware Upgrade YN685 II supports auto and manual zooming, and the flash coverage can be changed between 20 200mm. Equipped with the USB interface, supports firmware upgrade.

YN-300 adopts 300 high-quality LED light beads of extra-large luminous chips, the brightness is higher, the light spot is more uniform and the service life is longer.

Supports Wireless Master Function The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III

3, Improved Flash Shutter control Buttons

Hotshoe pass-through, allowing camera flash and wireless trigger to be used simultaneously.