Best choice
SABRENT M.2 NVMe Heatsink for PS5, Aluminium SSD Cooler with Thermal Silicone Pad, Compatible with PlayStation 5 Console – Easy Installation, Maximum Cooling (SB-PSHS)
Perfect Fit for PS5 Console Specially engineered to fit the PlayStation 5 M.2 SSD slot, replacing the original cover for simple installation and superior airflow. Fully compatible with all PS5 NVMe SSD expansions.
£ 16.99
Recommendation
Thermalright Peerless Assassin 120 SE CPU Air Cooler,6 Heat Pipes Aluminium Heatsink Cover, for Intel 1700/115X/1200, AMD AM4/AM5
AGHP technique 6 6mm heat pipes apply AGHP technique, Solve the Inverse gravity effect caused by vertical horizontal orientation,6 pure copper sintered heat pipes & PWM fan & Pure copper base&Full electroplating reflow welding process, When CPU cooler works, match with ultra-silent airflow fans, aim to extreme CPU cooling performance.
free delivery
Awxlumv Large LED Aluminum Heatsink 200 x 220 x 18mm / 7.87 x 8.66 x 0.7 Inch Cooler 30 Fins Heat sink Board
Made of high quality Aluminum, good thermal conductivity
free delivery
StarTech.com 20g Tube CPU Thermal Paste Grease Compound for Heatsinks - heat grease - cpu paste - thermal compound (HEATGREASE20)
Thermal conductivity of more than 1.066 W m-K
free delivery
33% discount
30G CPU Thermal Paste,Thermal Conductive Glue,Heatsink Thermal Paste,High Temperature Resistance Thermal Grease,High Performance Heat Sink Compound,Thermal Grease with High Thermal Conductivity
Efficient Heat Dissipation This cpu thermal paste is designed to meet the requirements of electronic equipment and other heat dissipation components.Using thermal conductive glue based on advanced thermal conduction technology,heatsink thermal paste ensures that your CPU can maintain the optimal temperature even under heavy load,thereby extending the life of the device and improving performance while using high temperature resistance thermal grease
£ 5.99
Richer-R PC Cooling Radiator,240MM Aluminum Computer Ra/diator Water Cooling Cooler 18 Tubes Heat Exchanger CPU Heat Sink
Water Cooling Radiator -- Effectively for heat reducing, maintain the proper temperature to keep your computer running well.
free delivery
Diymore TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 6A 60W (10Pcs)
Refrigeration power Qcmax 50-60W.
£ 23.99 free delivery
23% discount
Novstuf M.2 Heatsink for 2280 M.2 SSD, 2 Pack Aluminum Heatsink with Thermal Silicone Pads 70x22x3mm Radiator Heat Sink Cooling Fin for PC/PS5/PS5 Slim Installation
Easy Installation Use rubber bands to mount it. extremely slim package design that is easy to install and does not damage the hard drive.
£ 6.99
13% discount
QWORK® Aluminum SSR Heatsink , Heat Sink Radiator for Cooling 10-40A Solid State Relays , 2Pcs
Product Information Product Name Aluminum Heat Sink, Material Aluminum, Color Black
£ 7.99
Tesfish Aluminium Heatsink Cooling Fan+44mm Lens 120 Degree for 50W 100W LED Chip Light
Focus light, make the light looks much brighter; Fit for the 20W-100W High Power Led
free delivery
GeeekPi 102 PCS Raspberry Pi Heatsink Kit with Conductive Adhesive Tape (12 Different Sizes), Aluminum Heat Sink Cooler, Copper Heatsink for Raspberry Pi 4/3/2
The radiator kit is equipped with conductive tape for easy use. As long as the film is removed, it can be glued to the part that needs heat dissipation.
Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003
Compatibility Intel i3 i5 i7
ACIDALIE M.2 2280 SSD Heatsink, Aluminum Heat Sink for NVMe or SATA SSD with Silicone Thermal Pad
The best combination of high-performance pure copper heat pipes and aluminum tank cooling achieves optimal performance, supporting the installation of M2 2280 SSD solid state drive radiators in desktop computer hosts
free delivery
TAMIYA 300054571 TT-02 Anodised Aluminium Motor Heatsink, Blue anodised
TT02.
free delivery
Tuloka Heatsink with heat-conducting L 40 mm x W 40 mm x H 11 mm, pack of 4
Tuloka Heatsink with 4 Pieces Thermal tape, Heatsink Radiator Fin Heatsink for LED Amplifier Transistor, etc
25% discount
Thermal Paste,High Performance Heat Sink Compound,Thermal Conductive Glue,Easy to Apply Thermal Paste,High Durability Thermal Compound CPU,Thermal Interface Material,Suitable for Cpu,Gpu,Memory
Efficient Heat Dissipation This thermal paste is designed to meet the requirements of electronic equipment and other heat dissipation components.Using thermal conductive glue based on advanced thermal conduction technology,high performance heat sink compound ensures that your CPU can maintain the optimal temperature even under heavy load,thereby extending the life of the device and improving performance while using high durability thermal compound cpu
£ 3.99
Regin REG-Z20 Heat Sink Compound
Temperature range -50 C to 200 C
M.2 SSD Heatsink 4 Pack Aluminum Heatsink Cooler Cooling Fin with Thermal Adhesive Tape for M.2 SSD PC, 70x22x6mm, Black
Cheerful 4 Pack Heatsink & Thermal Pads 4 x aluminum heatsink Cooling Fin (each 70mm x 22mm x 6mm), large surface area and great fins; with 4 pieces of double-sided thermal tape whose thermal conductivity about 1.3 W (m K).
Heatsink Paste Thermal Compound, CPU Thermal Paste, Silicone Heat Sink Compound Thermal Putty Thermal Conductive Silicone Grease HY204 100g for Radiator Coolers LED Printer Chipset
Efficient Heat Transfer This thermal paste compound has low thermal resistance and high thermal conductivity, ensuring optimal heat transfer from the CPU to the heat sink. It efficiently dissipates heat, preventing overheating and ensuring the smooth of your computer components.
free delivery
FONGKNOX SSR Heat Sink, Heat Sink For Cooling 10-40A Solid State Relays
Suitable for single-phase solid state relays-10A, 25A, 40A, with powerful heat dissipation function
Aluminum Heat Sink Large 300 * 140 * 20MM Cooling Heatsink for Transistor
Made of high quantity aluminum, good thermal conductivity
free delivery
EZDIY-FAB Shield ARGB M.2 SSD Heatsink with Build-in 20mm PWM Fan, Premium Aluminum Design,5V 3-Pin ARGB Sync, High-Performance SSD Cooler for M.2 2280-White-1 Pack
High-Performance Cooling and Aesthetic Design The Shield Series M.2 SSD Heatsink delivers efficient cooling while enhancing the aesthetics of your PC setup
free delivery
Creality Ender-3 V3 Heatsink Cooling Block - High-Efficiency Aluminum Heatsink for Ender-3 V3 3D Printer, Improve Heat Dissipation & Prevent Clogging, Easy to Install & Durable Design
Easy to Install Specifically designed for the Creality Ender-3 V3 3D printer, this heatsink is easy to install and requires no additional modifications. Upgrade your printer in minutes
free delivery
SABRENT SSD M.2 NVMe Heatsink with built-in screw, Aluminum m2 heatsink with thermal Silicone cooling Pads, NGFF SATA Heat Pipe Cooler fits PC, desktop computer, DIY computer builder, PS5 (SB-HTSK)
THE NEW COLOSSUS This heatsink really stands out no doubt quite the conversation piece for your new build, but it also has the height to help the heat pipes do their thing.
free delivery
17% discount
Memory RAM Heat Sink, Laptop Memory Heatsink Kit Water Cooling Heatsink for DDR5 Memory (Silver)
Wide Compatibility Specifically designed for DDR5 memory modules, the heatsink is compatible with various brands and models, giving you the flexibility to use it with different systems and configurations.
£ 13.59
24 Piece Heatsinks For Raspberry Pi 4 Model B, Raspberry Pi 4B Heatsink Kit Aluminum with Thermal Conductive Adhesive Tape For Raspberry Pi 4B
24 Pack per Set - Come with 24 pack Heatsinks For Raspberry Pi 4 Model B. Come in 4 different size. 6 pack for each size.
8% discount
Heatsink, 00x40x40 mm Heat Sink Silver Aluminium Cooler Silver Aluminium Cooler for Raspberry Pi /2/3 Set Top Box and Power Supply PCB
Lightweight Design The heatsink is engineered for applications where minimizing weight is crucial. Its lightweight construction makes it suitable for various electronic devices without adding unnecessary bulk.
£ 6.22
20% discount
DS M2 SSD Heat Sink with 3PIN LED ARGB Header, Thermal Silicone Pad for NGFF NVMe 2280 M.2 PCIe, Compatible with Aura or Mystic (M Series)
Equipped with 5V ARGB LED lights, you can control and change the colors by connecting to motherboard or by 5V 3PIN ARGB controller (not include Controller)
£ 9.99
GLOTRENDS M.2 Heatsink for 2280 M.2 SSD, Fit for PC/PS5/PS5 Slim Installation,22x70x3mm Aluminum Body, Including Thermal Pad
The M.2 SSD heatsink is for PC PS5 PS5 Slim, not for laptops. 22x70x3mm aluminum body, it can work with all 2280 M.2 SSDs.
32 Pcs (8 Set) Heatsink for Raspberry Pi 4B Aluminum Heatsink Cooler Cooling Kit with Thermal Conductive Adhesive for Raspberry Pi 4 Model B
Great Adhesion - These Raspberry Pi 4 Model B heatsinks are self adhesive. The heatsinks with thermal conductive adhesive can stay on the motherboard well without fall off.
VooGenzek 40 PCS Heatsinks for Raspberry Pi 4 Model B, Aluminum Heat Sink Cooler Kit, with Thermal Conductive Adhesive Tape, for Cooling Raspberry Pi, Silver
Package Includes There are four sizes, 7*7*3mm, 7*7*6mm, 9*14*5mm, 14*15*4mm Aluminum Heat sinks, 10of each type to meet your daily needs.
20% discount
KOAHDE White Thermal Conductive Glue,Thermal Paste,High-Performance Thermal Plaster,Thermal Adhesive Paste,Thermal Conductive Heat Sink Glue,Performance Thermal Paste for CPU,100ML
Quality and Safety The thermal conductive glue has been strictly tested to ensure that it will not affect your equipment and health, while providing excellent heat dissipation performance, and can be used with confidence
£ 4.99
Toaiot- K1 Max Extruder Motor Heatsink - Aluminum Heat Sink for K1C 36 Stepper Motor Heat-Dissipation: Easy Install Temperature Cooler to Prevent Nema14 Round Pancake Motor from Overheating (Black)
A must-have 3d printer Accessories Spare Parts for K1 Max Hotend 2PCS Motor Cooling Heat Sink (Black) for Crealty K1 K1 Max K1C Extruder.
Be Quiet MC1 Pro M.2 SSD cooler, heatsink with heat pipe, for single and double sided 2280 modules, BZ003
All-black finish for an elegant look
20% discount
Thermal Conductive Double Side Adhesive Tape Cooling Tape For Heatsink Chipset IC LED GPU CPU, Aixin (5mm*25M)
* 5mmx25M (Width x Length), Thickness 0.2mm
£ 4.86
DHYAWUER M.2 SSD NVMe Heat Sink M2 2280 Solid State Disk Air Circulation Radiator with Fan Aluminum Heatsink Thermal Pad Cooler
Aluminum alloy heat sink. The heat of the M2 hard disk is conducted to the aluminum alloy heat sink through the thermal grease.
YOUMILE 15 Pack Adhesive Aluminum Heat Sink Cooler Kit For Cooling Raspberry Pi
The Heatsink have a layer of adhesive on the back of them.
ALAMSCN 2PCS TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12V 6A 60W Thermoelectric Peltier Cooler + 2PCS Heatsink 40 x 40mm
40mm aluminum radiator, this heat sink can increase the surface of the board, thereby ensuring greater heat transfer.
CTRICALVER 4 PCS Heatsink Kit,40mm x 40mm x 11mm Aluminum Heatsink Cooling Fin Black, With Blue Thermal Conductive Adhesive Tape
Material Heat sink radiator fin is made of premium aluminum, good thermal conductivity, rustproof, sturdy, durable and lightweight. Because it is pure aluminum, its heat dissipation effect is higher than aluminum alloy, so it is very suitable for measures to prevent thermal runaway.
sourcing map 30 Pcs Aluminum Heatsink, Cooling Fins Cooler Aluminum Chipset Heatsink Heat Sink for Cooling IC Chips, Computers, 9mmx9mmx5mm
Versatile Use Aluminum chipset heatsink can be used in a variety of applications, such as 3D printers, stepper motor, VRM GPU stepper drive, computers, LED light devices, IC chips etc.
ViaGasaFamido TEC1-12703 Heatsink Thermoelectric Cooler 30 x 30mm 12V 3A Ceramic Cooler
Easy to Use Our products is a cool plate module, and built to strict quality control standards, as a artistic appearance and simple structure, very friendly to novices.
Aluminium Heatsink Case for Raspberry Pi 4 (Zircon Blue)
Why use a heatsink and a case, when you can use a heatsink case?!
4 Pack Aluminum Electric Engine Motor Heatsink Cooling Heat Sink Fins for 550 540 3650 Size Brushed Brushless Motors RC Car Truck Accessories
Works on 550 540 Size Electric Engine Motor,Compatible with most Traxxas, HPI, Tamiya, and Losi Electric Motors
ARCTIC M2 Pro - Heatsink cooler for M.2 2280 SSD, with ARCTIC TP-3 thermal pads, compatible with PC & PS5, for dual and single-sided SSDs - Silver
EFFICIENT HEAT DISSIPATION lower SSD heat and faster cooling. Thanks to its additional mass, the ARCTIC M2 Pro effectively dissipates heat and transfers it to the environment
free delivery
M.2 Heatsink Cooler, NVMe M.2 2280 SSD Double-Sided Heat Sinks with Silicone Thermal Pad for PC/PS5 (Gray)
Designed for desktop PCs This M.2 SSD heat sink has been specially developed for desktop computers and is compatible with both single-sided and double-sided types. Perfect fit for Samsung 860 EVO, 960 EVO, 970 EVO, 970 Pro, 980 Pro, PS5 etc.
6% discount
MICRO CONNECTORS M.2 SSD 5mm Low-Profile Heat Sink Compatible with PS5 and PC (NGFFM2-HS804-BK) Black
5mm Low-profile height to work around tight spaces
£ 7.91
12% discount
Ubanner DS Universal RGB RAM Shell Memory Glowing Heatsink for PC Case, LED Cooling Vest Fin Heat Sink for Computer Case DDR3 DDR4 (2nd Gen, M Series)
Compatible with DDR2 DDR3 DDR4 and single double side(s) RAM
£ 15.79
40 * 40mm Aluminum Water Cooling Block for Liquid Water Cooler Silver Heat Sink System for CPU Radiator Heatsink (2 Pack)
Internal flow channel extrusion forming,brazing parts into a whole
ELUTENG M.2 SSD NVME Heatsink 2280 Support Double Sided M2 SSD Cooling with Thermal Silicone Pads Cooler for Computer PC PS5 Internal Storage PCIE NVME or NGFF SATA M.2 SSD Installation
Applies to PS5 PC M.2 heatsink fits PS5 PC. 0.39 inches to 1 cm high M.2 heat sink, which is well suited for PS5 internal storage installation as well as for the PC-M.2.
sourcing map 1 Pack M.2 2280 Nvme SSD Heatsink Cooler with Thermal Pad Alloy Aluminum Heat Sink Cooling Sink for PC Laptop, 70x22x6mm, Black
Remove the old radiator from the computer, and then install the new radiator on the computer with a screwdriver tool
MoneyQiu HY-510-25g Thermal Conductivity: >1.93W/m-k thermal heatsink paste grease Compound Carbon Based High Performance non-conductive for pc cpu gpu 25 Gram
EXCELLENT THERMAL CONDUCTIVITY Thermal Paste conductivity 1.93 W m-k. It ensures that the heat generated by the CPU or GPU is effectively dissipated.and subsequently excellent temperature reduction performance
HALJIA TEC1-12705 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 45W
Reverse the polarity to get device cold in minutes or heat
Be Quiet MC1 Pro M.2 SSD cooler, heatsink with heat pipe, for single and double sided 2280 modules, BZ003
All-black finish for an elegant look
£ 18.99
Haojiaho Copper HeatSink 10 x 10 x 6 mm with Thermally Conductive Adhesive Tape, Anti - thermal Runaway, Pure Copper Heat Sink for CPU IC Chip, Circuit Board, Precision Equipment Cooling, 2PCS
1. Copper heat sink This heat sink provides a solution to reduce the temperature of components, suitable for cooling precision equipment, circuit boards, CPUs, IC chipboards, etc.
Heat Sink, 1pc Aluminum Heat Sink 300x140x20mm Cooling Heatsink for High Power LED Light
Made of high quantity aluminum, good thermal conductivity
ARCTIC M2 Pro - Heatsink cooler for M.2 2280 SSD, with ARCTIC TP-3 thermal pads, compatible with PC & PS5, for dual and single-sided SSDs - Black
EFFICIENT HEAT DISSIPATION lower SSD heat and faster cooling. Thanks to its additional mass, the ARCTIC M2 Pro effectively dissipates heat and transfers it to the environment
zalati Copper Cooling Block Water Cooling Heatsink DIY Warm Heat Sink System for PC Computer CPU Graphics Radiator 40x80mm
Copper cold water faucet is 8.5mm wide and 7mm inner diameter
M.2 Heatsink Copper, Pack of 2 M2 NVMe Laptop Copper Heatsinks with Silicone Thermal Pads for PCIE SATA M.2 2280 SSD Portable Enclosure Desktop PC Laptop
Ultra-thin Design Thickness 1mm, specially designed for compact spaces, such as laptops, M2 portable enclosure. Compatible with most laptops and desktop computers, supports PCIe NVMe SATA M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
Raspberry Pi CM4 12mm Aluminum Heatsink/Cooler/Radiator/Protective Shell Support 30mm Fan (C235)
12mm RPi CM4 heatsink Geekworm designed 12mm aluminum heatsink for Raspberry Pi Compute Module 4
GRAUGEAR Heat sink for SSD M.2 NVMe 2280 - compatible with PlayStation 5, PS5 Slim, complete cooling kit with dust cover.
Heat Dissipation Cover The ventilation holes of the cover ensures the best thermal conducting efficiency and reduces heat from M.2 SSD by up to 45 Percent. Combined with aluminum fins to achieve better heat dissipation performance.
TAMIYA 300054571 TT-02 Anodised Aluminium Motor Heatsink, Blue anodised
TT02.
HSEAMALL 20PCS 40mm Heatsink Kit,40mm x 40mm x 11mm Aluminum Heatsink Cooling Fin Black
Package Content 20PCS 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin.
Aluminum Heat Sink, High Power Aluminum Radiator Heatsink Heat Sink Cooling Fins Cooler, Heatsink Kit Module Cooler Fin for LED Amplifier Transistor IC Module(300x140x20mm)
Good Cooling Performance Aluminum heatsink including 19 teeth, increase the area of the heat sink, not easy to aging and abrasion resistant, and have good thermal conductivity.
Tbest Motor Heat Sink, 540/550 Motor Heatsink Twin Cooling Fan RC Motor Fan for 1/10 Scale Electric RC Car(Blue) Model Toy
HIGH QUALITY With high quality materials, which has exquisite workmanship, and for long term use.
Lsgoodcare 5V DIY Phone Heatsink Module Kit, USB Semiconductor Refrigeration Cooler, Tablet Cooling System Peltier Heat Sink with Heat conducting Sheet
Cell Phone DIY Peltier Cooler Kit is made of fine materials, sturdy to cool the phone temperature, and could use for a long time
Pure Copper Heatsink Pack for LattePanda (5 pcs)
This tiny little orange heatsink is a perfect solution for cooling LattePanda
Vbest life 1/10 RC Aluminum Alloy Heat Sink With Cooling Fan for 540/550 / 3650 Motor RC Car (Gold)
Vbest life
Black All -Aluminum waterworking seat Lidar Set Heat Sink Bracket Laser Fixed Bracket for 12mm Laser Module(1.78″×0.9″×1.06″) (2pack)
Circle diameter 12mm, size 45 23 27mm 1.78 0.9 1.06
M.2 2230 SSD Heatsink, Double Sided Clamp Design Heat Sink Cooler with 6 Adjustable Height Screws, Thermal Silicone Pad, M.2 2230 NVME SSD Copper Heat Sink
Easy Installation and Operating Double sided clamp design with 6 adjustable height screws, this heatsink cooler id suitable for various heights of M.2 SSD, providing stable installation and better guard for your M.2 SSD.
9% discount
ADWITS 6 Pack Assorted Thickness 0.5 1.0 1.5 mm Thermal Conductive Silicone Pads with 6.0 W/mk Thermal Conductivity, Soft Safe Simple to Apply for SSD CPU GPU LED IC Chipset Cooling -Blue
Excellent thermal conductivity Made of thermal silica gel with heat conductivity of 6.0W Mk
£ 6.08
GDSTIME 5V 25mm x 10mm Brushless Cooling Fan 25 x 10 2510 Mini Radiator Heat Sink For DIY Replacement (2 Pack)
PBT Plastic Frame and Fan Blades, the whole fan is strong, durable ,corrosion resistance, so fan life span as loong as 35,000 Hour at 25
Dilwe Motor Heat Sink, Heat Sink With Cooling Fan for 1/10 Scale Electric RC Car 540/550 Motor(Black)
Safe to Use Good heat dissipation performance ensures safe and efficient work.
Miuzei Active Cooler for Raspberry Pi 5, PWM Cooling Fan and Alumium Heatsink for Pi 5B Model B 8GB/4GB
Effective Heat Dissipation Metal alloy heat sinks + 3510 cooling fan can efficiently absorb and dissipate heat, helping to lower the temperature of the Raspberry Pi 5 and ensuring stable performance under high loads
DMiotech 3 Pcs SSR Heat Sink Aluminium Heat Dissipation Base SSR Cooling Base Compatible for SSR DA SSR AA Solid State Relay, Silver
APPLICATION The SSR heat sink is designed to provide effective heat dissipation for solid state relays, ensuring stable and reliable operation, suitable for solid state relays, industrial control systems and automation equipment, temperature devices, lighting systems and home appliances requiring efficient heat management.
Mxfans N10108 Red Aluminum Alloy plastic Motor heatsink with 2 Fans for RC 1:10 Car 540 550 Motor Heat sink
Compatibility Applicable Models Suitable for RC 1 10 car 540 550 motor heatsink, not suitable for Traxxas 2200 kv 6s motor.
POFET SSD Heatsink m.2 2280 Heatsink Solid State Drive Cooling Bracket for Dell G15 5510 5511 5515 5520 5521 5525
Perfectly compatible with Dell G15 5510 5511 5515 5520 5521 5525.
Aluminum Heat Sink for K1C K1max 3D Printing Extruder Motors Up to 36MM Enhances Overheat Protections
Ensures your 3D printer operates smoothly and efficiently with our aluminum heatsink.
AZDelivery TEC1-12706 12V Thermoelectric Cooler Peltier Heatsink Plate, -30°C to 70°C, 60W 6A TEC 3A 5.8A Cooling Heat Sink Element Device Module including E-Book! (Pack of 3)
Easy to install and operate You can get ice cold or bring something to a boil by simply reversing the polarity, operating temperature ranges from -30 C to 70 C
Puco M.2 NVMe 2280 SSD Heat Sink, Copper Cooler, Simple Mounts, Thickening And Heightening
Puco
Khadas New VIM Heatsink, 6063 Aluminum, Black, M2x4 Mount, For VIM4/VIM3/VIM2 (v1.4+)/VIM1/Edge-V, Includes Blue & Pink Thermal Pads and Screws
Specifications Material 6063 Aluminium;Colour Black;Mounting M2x4;Fan Mounting M1.4x4;Weight 17.0g;Dimensions 81.0 x 49.1 x 8.9 mm
3D Printer Heatsink, Aluminum Fast Heat Dissipation, Lightweight, for Crealiity Ender 3 S1, Ender 3 S1 Pro, Ender 3 S1 Plus, CR 10 Smart Pro, Sermoon V1, Sermoon V1 Pro
Aluminum Construction Made of aluminum, the large solid heatsink offers better heat transfer, faster cooling, and scratch resistant for prolonged usage. The heatsink is also resistant to bending, ensuring long lasting performance.
BSFF Thermal Paste, 16.5g with Toolkit CPU Paste Thermal Compound Paste Heatsink for IC/Processor/CPU/All Coolers, Carbon Based High Performance
HIGH DURABILITY BS-139 thermal paste Edition formula has excellent component heat dissipation performance and has the stability to push the system to the limit.
Akasa M.2 SSD Heatsink | Aluminum Heatsink Cooling Fin | Pre-applied Thermal Adhesive Tape | 71 x 22 x 6.4mm | Suitable for M.2 2280 SSD & PS5 Pro | Black | 2 Pack | A-M2HS01-KT02
Easy Installation -Self-adhesive tape design enables quick and easy installation of M.2 SSD. A must-have kit for every PC enthusiast.
KIMISS Copper Heatsink, 4Pcs 4B 1G 2G 4G Cooler with Thermal Conductive Adhesive Tape, Pure Copper Heatsinks for Enhanced Performance
Enhanced Heat Dissipation Heatsink for Raspberry made with a pure copper surface cut into polyhedra, these heatsinks have been designed to significantly improve the heat dissipation for , ensuring optimal performance during strenuous usage.
Aairhut Thermal Pad 6W/mK 4 Pack, 100x100mm 0.5mm 1mm 1.5mm 2mm Silicone Cooling Pad GPU Non Conductive Heat Resistance Extreme Odyssey Cover for Laptop Heatsink/CPU/GPU/SSD/IC/LED Cooler
HIGH VALUE 4 PACKS - Comes with 4 packs of different sizes(0.5mm, 1mm, 1.5mm and 2mm) in one package. Suits various of cooling demands in electronic components like CPU GPU chipset motherboard module and the heat sink
Yctze Aluminum Heatsink, Heat Sinks Cooling, Large Heat Radiator, For Power electric device, LED light devices
Yctze
Pxyelec Heatsink Copper Pad Thermal Shim Copper Plate Cooler for Cooling IC Chipset GPU CPU Size 20 x 20 x 1.0 mm Pack of 20
Functionality Heatsink cooling fin reduce the risk of hardware failure due to overheating, save your device from fail prematurely
10 Pack Thermal Paste Kit (5.15 W/MK 1 G/Pcs), High Performance CPU Thermal Paste Compound, Carbon Based Heatsink Paste for PC/PS4/IC/Processor/All Coolers, Thermal Interface Material (10 Pack)
Better Than Liquid Metal Super carbon nano-grade super thermal conductive silicone grease. Thermal conductivity 5.15 W m-k. It ensures that the heat generated by the CPU or GPU is effectively dissipated.
StarTech.com 20g Tube CPU Thermal Paste Grease Compound for Heatsinks - heat grease - cpu paste - thermal compound (HEATGREASE20)
Thermal conductivity of more than 1.066 W m-K
Heat Sink, Copper RAM Heat Sink, 8 Piece Cooling Fin Kit, Computer Cooling Heatsink, CPU and MOS Tube Heat Sink
100% service If you are not satisfied, please contact us anytime, we will provide the best solution for you.
QIVYNSRY M.2 Heatsink NVME 2280 SSD Heat Sink Support Single Double Sided M2 SSD Cooling with Thermal Silicone Pads Cooler for Computer PC PS5 PCIE NVME or NGFF SATA M.2 SSD Installation, Black
Good Cooling Effects for Upgrade Your Computer with M.2 NVME NGFF Disk - Specially designed for new M.2 M key or B key disks, this M.2 SSD heatsink is perfectly work with M.2 2280 SSD, fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, for Crucial P2, P5 Plus, Seagate Firecuda 530, etc.
Heat Sinks, Small Heatsink Cooling Kit,12Pcs Aluminum Heatsink with Adhesive Glue on Back for Computer Power IC Power Electric Device LED Light Devices, 14×14×6mm
GOOD THERMAL CONDUCTIVITY-Made of high quantity aluminum, the small aluminum heatsink is of good thermal conductivity
DAOKAI 15 Pcs Aluminium Heatsink Cooling Set Cooler Heatsink Protect The Motherboard, for Cooling Raspberry Pi with Thermal Conductive Adhesive Tape
High-quality material Aluminum radiator, light weight, oxidation resistance, corrosion resistance, good heat dissipation, better protection of the board to continue to work and prolong the service life.
ZHUROUPU 2230 SSD Heatsink Thermal Pad Replacements for Steam Deck-Back Cover Opening Tools-Screws-Screwdriver-Assembly Copper Heat Sink Heat Sink Cooling Thermal Pad for Stream Deck SSD
Saving money You don't need to spend high repair costs, you only need to use your own hands-on ability and professional knowledge, saving money and time
Aluminum Heatsink, Akozon Heatsink Circuit Board 12pcs Small Aluminum Heatsink Cooling Kit with Adhesive Glue on Back 14x14x6mm for Computer Power IC
Wide scope of application This mini cooler heatsink circuit board is widely use for computer, power IC, power electric device, LED light devices, etc. Specially designed for high performance household LED light or aquarium LED devices etc.
Bewinner Steam Deck SSD Heatsink Thermal Pad, M.2 2230 NVME SSD Copper Heat Sink Cooling Thermal Pastes Back Cover Opening Tools, Replacements Screwdriver Repair Kit for Stream Deck SSD
INCLUDED Includes 1 x 0.5mm 0.02in Copper Heatsink, 2 x 0.13mm 0.01in Phase Change Thermal Pads, 3 x 0.5mm 0.02in Silicone Thermal Pads, 1 x Screwdriver, 1 x Split Pry Bar, 1 x Triangular Pry Tool, 18 x Screws.
WayinTop 10 Packs TO-220 Aluminum Heatsink & Insulator/Mounting Kits for TO-220 MOSFET Transistor, TO-220 Heatsink + M3 Screw + Screw Washer + Insulator Rubberized Silicone (20mmx15mmx10mm)
Heatsink Size 20 x 15 x 10mm 0.79" x 0.59" x 0.39" with a M3 screw holes.
YAODHAOD Memory RAM Cooler,Graphene Memory Cooling Cooler,Fast Heat Sink for DDR4 DDR5 Laptop Memory,DDR Memory RAM Cooling Vest (Graphene+copper, DDR3 to DDR5)
Customer Service We warmly welcome customers to contact us and ask questions Supports 30-day free exchange and return as well as free replacement for quality problems within one year
SYY Thermal Paste, 4g with Toolkit Upgrade Easy to Apply Thermal Paste Cpu Heatsink for IC/Processor/CPU/All Coolers, Carbon Based High Performance, Thermal Interface Material
BETTER THAN LIQUID METAL It is composed of carbon particles and has extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is effectively dissipated.
JLJ Thermal Paste with Tool Kit, 6G CPU Paste Thermal Compound Paste Heatsink for IC/Processor/CPU/GPU/PS4/All Coolers, Carbon Based High Performance, Thermal Interface Material
BETTER THAN LIQUID METAL High Thermal Conductivity, it is composed of carbon particles and has extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is effectively dissipated.
2PCS PC Thermal Paste,Heatsink Thermal Paste,Thermal Paste CPU,High Performance Heat Sink Compound,Efficient Thermal Grease for All Processors,Thermal Paste with High Thermal Conductivity,CPU Cooler
Efficient Heat Dissipation This pc thermal paste is designed to meet the requirements of electronic equipment and other heat dissipation components.Using heatsink thermal paste based on advanced thermal conduction technology,thermal paste cpu ensures that your CPU can maintain the optimal temperature even under heavy load,thereby extending the life of the device and improving performance while using high performance heat sink compound
HTU RC Motor Heat Sink with 5V Cooling Fan Electric Motor Heat Sink for 1/14 1/16 1/18 370 380 390 RC Car for 2838 2858 2845 Brushless Motor
Easy Installation Compact and lightweight, this crc motor heat sink is designed for easy installation and removal, providing convenience and flexibility for your setup.
free delivery
11% discount
Richer-R Computer Cooling Radiator,Aluminum Radiator Water Cooling Cooler Row 80MM for PC Computer CPU Heat Sink Work for 8-10 mm Diameter of tube
Tip Easy to install.Any questions,Please feel free contact us,we will provide you with high quality after-sales service.
£ 13.73 free delivery
Thermalright Peerless Assassin 120 SE CPU Air Cooler,PA120 SE,6 Heat Pipes Cpu cooler,Dual 120mm TL-C12C PWM Fan,Aluminium Heatsink Cover,AGHP Technology,for AMD AM4/AM5 Intel 1851/1700/1150/1200
Brand Overview Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in the domestic and foreign markets and has a pivotal influence in the player market. We have been focusing on the research and development of computer accessories. R & D product lines include CPU air-cooled radiator, case fan, thermal silicone pad, thermal silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities
free delivery
RC Car Motor Cooling Fan Heatsink with Thermal Sensor for CNC Aluminum Alloy Clamp Heatsink(red) Rc Car Model Accessory
AUTOMATIC TURN The rc car motor heatsink with temperature sensor will accurately detect temperature rise, when engine temperature rises to 40 , cooling fan will automatic turn on to cool engine.
free delivery
Heat Sink Thermal Paste - Carbon Based High Performance CPU Thermal Paste for All processors (CPU, GPU, PC) - CPU Paste with Ultra-Efficient Heat Dissipation with Zero Electrical Conductivity
This thermal paste CPU is so simple to apply that even amateurs can do it. The precisely designed syringe ensures an easy, comfortable, and exact distribution of the paste on your graphic card and CPU, among other things.
free delivery
Aluminum Heatsink Cooler, 1 PCS Cooling Fin for Computer Power IC, Electric Device, LED Light - Heat Sink 100 x 69 x 36mm / 3.93 x 2.71 x 1.41"
Easy To Use Place this heat sink radiator under mobile device to cool them,easy to install and easy to use. light weight, high thermal efficiency, beautiful overall shape, novel and light.
free delivery
1pc Aluminium Heat Sink,100×69×36mm Heatsink Module Cooler Fin,Cooling for Led Amplifier Transistor IC Module,PC Computer,PCB
Aluminium Heat Sink The electronic heat sink is made of high quality aluminium with excellent thermal conductivity. This aluminium heat sink is able to conduct heat away quickly and ensure the stable operation of electronic devices. Whether in a high temperature environment or under prolonged use, it can provide reliable heat dissipation for your equipment.
free delivery
Pack of 30 HeatSink TO-247 Thermal Pad Heat Insulation Sheet Transistor Silicon Conduction
Thermal conduction transistor silicone pads
free delivery
40 Grams White Thermal Conductive Paste,Thermal Conductive Grease Paste Silicone Compound for CPU GPU Heatsink White
Suitable for CPU, CPU cooler or chip, heat sink, oven, chipset, high power LED and other components.
free delivery
Awxlumv 120mm Large Heatsink Aluminum Heat Sink 4.72x4.72x0.79Inch/ 120x120x20mm Square Cooler for Router Cooling Base and Power Supply IC Graphics Card Memory Heat Sink 120mmx120mmx20mm
1. 120mm square anodized aluminum heatsink. (Dimension 4.72 x 4.72 x 0.79 inch 120x120x20mm (L*W*H))
HOMSFOU 2sets 2 3 Heat Sink Aluminum Cooling Board Cooler for Heat Sink Cooler Adhesive Tape 8pcs*2
Aluminum heatsink cooling circuit board can be applied in other devices such as the to cool processor, regulators, etc,aluminum heatsink cooling board
free delivery
Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Led Amplifier Transistor Semiconductor Devices with 23 pcs Fins 3.93"(L) x 2.71"(W) x 1.41"(H) / 100mm (L) x 69mm(W) x 36mm(H)
Efficient Heat Dissipation Designed with 23 fins, this aluminum heat sink effectively dissipates heat, ensuring optimal performance and longevity for your high-power LED and semiconductor devices.
free delivery
SPICOM Silicone Thermal Heat Sink CPU Processor Compound Cooling Grease Paste thermal conductivity >1.93W/m-k
Thermal compound is necessary to create a reliable transfer of heat from your computer's processor to its heat sink to keep your CPU from overheating.
free delivery
GeeekPi 18PCS Pure Copper Heatsinks for Raspberry Pi 5/4B, CPU Cooler Heatsinks with Thermal Conductive Adhesive Tape
Compatibility Perfectly compatible with Raspberry Pi 5 and Raspberry Pi 4 Model B 1GB 2GB 4GB 8GB.
Cuifati M.2 2280 SSD Heatsink with PWM Fan and Thermal Silicone Pad - Automatically Adjusts, Low Noise, Plug and Play
Automatic Adjustment PWM intelligent worm fan can automatically adjust the fan speed according to different temperatures, save energy, reduce noise, and extend service life
free delivery
Thermal Paste,Thermal Conductive Glue,High Performance Heat Sink Compound,Heatsink Thermal Paste,Long-Life Thermal Grease,for Cpu,Gpu,Memory,Electronic Equipment and Other Heat Dissipation Components
Efficient Heat Dissipation This thermal paste is designed to meet the requirements of electronic equipment and other heat dissipation components.Using thermal conductive glue based on advanced thermal conduction technology,high performance heat sink compound ensures that your CPU can maintain the optimal temperature even under heavy load,thereby extending the life of the device and improving performance while using heatsink thermal paste
EZDIY-FAB M.2 SSD heatsink 2280, Double-Sided Heat Sink, High Performance SSD Radiator for PC / PS5 for PCIE NVME M.2 SSD or SATA M.2 SSD- Black
Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
HALJIA 3x Aluminium Heatsink Cooler Cooling set Compatible with Raspberry Pi 3 Model B/Pi 2 Model B/Pi B+ (B plus) - Set of 3 Heat Sinks
With thermal transfer peel-and-stick tape
7% discount
AMD Wraith Prism RGB LED CPU Heatsink Cooler AM4 OEM
Brand AMD
£ 37.57 free delivery
HY500-100g Thermal Heatsink Paste Thermal Conductivity:>1.93W/m-k Carbon Based High Performance, Thermal Compound CPU for PC CPU GPU PS4 PS5 LED - 100 Gram
EXCELLENT THERMAL CONDUCTIVITY Thermal Paste conductivity 1.93 W m-k. It ensures that the heat generated by the CPU or GPU is effectively dissipated.and subsequently excellent temperature reduction performance
Cuifati 2pcs DDR5/DDR4 Ram Cooling Heatsink Graphene Fast Conduction Stable Durable Copper Heat Sink for DDR4 DDR5 Laptop Memory
Designed for Laptop This memory cooling heatsink is specially designed for laptop DDR5 or DDR4 memory.
£ 7.84
Topiky M.2 2280 SSD Heat Sink, 5V 3 Pin M.2 SSD Heatsink Cooler, RGB SSD Heatsink M.2 SSD Heatsink Cooler For 2280 M.2 SSD with Thermal Pad
Efficient Heat Dissipation The hard disk radiator can effectively solve the problem of M.2 hard disk being slowed down due to high temperature, thereby prolonging the service life.
Geekworm H505 Active Cooler Fan for Raspberry Pi 5, Aluminum Heatsink with Blower PWM Fan
Good Heat Dissipation With ultra-quiet 3007 cooling fan and thermal pads, heat dissipation is ranking right on par with official raspberry pi 5 active cooler
uxcell 1 Pack M.2 2242 SSD Heatsink Cooler Copper Heat Sink with Silicone Thermal Pads,Triangle Pry Tool,Screwdriver,Screws,Copper Tone
This heatsink cooler is mainly used in laptops,PC ,Graphics card,Memory,Chip.
GDSTIME 2 x 40mm 12V Fan 40mm x 20mm Cooling Fan 6000 RPM High Performance Speed 3 Pin Brushless Mini Cooler For Heatsink or 4020 Fans Replace
Package 40mm cooling fan and Mounting Screws & Nuts;
Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Transistor Semiconductor Devices 3.93"(L) x 3.93"(W) x 0.7"(H) /100mm(L) x 100mm(W) x 18mm(H)
The 16 pcs fins increase the sealing area and thus ensure better heat dissipation.
Aluminum Heat Sink 300 * 140 * 20MM 19 Fins Cooling Heatsink for High Power LED Light
Reduce the risk of LED light failure due to overheating
free delivery
ASHATA Water Cooling Block,Aluminum Alloy Heat Sink Cooling Liquid Cooler Vacuum Aluminum Brazing Water-Cooled Block for Computer CPU Water Cooling,Industrial Inverter Drive,Head Cooling (40x120mm)
Water-cooled Block Internal flow channel extrusion forming, aluminum alloy welding integrated molding.
free delivery
Dilwe Motor Heat Sink, Heat Sink With Cooling Fan for 1/10 Scale Electric RC Car 540/550 Motor(Blue)
5V Cooling Fan Equipped with 5V cooling fan, practical for protecting the motor from overheating
free delivery
Aluminum Large Heatsink 4.72''x2.72''x1.06'' inch /120x69x27mm Heat Sink Cooling Black Oxide Radiator 22 Fin 120mm for Computer LED Chip Power Charger Router Amplifier
5. Package Include 1x Aluminium Heat sink Cooling Fin
Genuine Intel E97379-001 Low Profile LGA 1155 1156 4Pin CPU Heatsink Fan
Supports Intel Core i3 Socket 1156 processors up to 3.06 GHz
Processor Thermal Paste - Heat-Resistant Computer Thermal Paste | Thermal Putty Thermal Compound Paste, Efficient PC Thermal Paste, Heatsink Compound for Electronic Devices
Rapid Heat Dissipation Rapidly conducts heat from the heat source to the cooling system, ensuring that electronic devices maintain a stable temperature during high load operatings, avoiding performance degradation or damage due to overheating
free delivery
Heat Sink Thermal Paste - Carbon Based High Performance CPU Thermal Paste for All processors (CPU, GPU, PC) - CPU Paste with Ultra-Efficient Heat Dissipation with Zero Electrical Conductivity
This thermal paste CPU is so simple to apply that even amateurs can do it. The precisely designed syringe ensures an easy, comfortable, and exact distribution of the paste on your graphic card and CPU, among other things.
free delivery
GeeekPi 8PCS Heatsinks For Raspberry Pi 4 Model B, Aluminum Heatsinks with Thermal Conductive Adhesive Tape
Only for Raspberry Pi 4 Model B;Black Version,please refer to ASIN B085G73SCB
Aluminum Heatsink, CTRICALVER Heat Sink Thermal Adhesive Pad Cooler, for Cooling 3D Printers (20pcs,black)
Product parameters Size 7 x 14 x 14 mm;Color Black
SABRENT SSD M.2 NVMe Heatsink with built-in screw, Aluminum m2 heatsink with thermal Silicone cooling Pads, NGFF SATA Heat Pipe Cooler fits PC, desktop computer, DIY computer builder, PS5 (SB-HTSK)
THE NEW COLOSSUS This heatsink really stands out no doubt quite the conversation piece for your new build, but it also has the height to help the heat pipes do their thing.
free delivery
EZDIY-FAB NVME M.2 Aluminum Heatsink 5V 3 Pin ARGB Cooler for 2280 M2 SSD Heat Sink Tri-Cool with Silicone Thermal Pad
Sync RGB lighting via motherboard - ONLY works with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB header of your motherboard before purchase!)
sourcing map Copper Heatsink 6x6x5mm with Self Adhesive for IC Chipset Cooler Pack of 5
All size is measured manually, please allow + -0.1 inches error.
Geekworm Raspberry Pi Zero 2 W Heatsink, 10mm Aluminumn Alloy Radiator Accessories (C296)
Compatibility C296 is a 10mm aluminum alloy heatsink for raspberry pi zero 2 w, also compatible with raspberry pi zero w by using thermal pads of different thicknesses (1-1.3mm is ok, better to use 1.3mm)
10 Pcs Heat Sink 20x15x10mm Black Aluminium Alloy Heatsink Compatible with TO-220 Transistors
Strong heat conductivity and heat dissipation
Haojiaho M.2 2280 SSD Heatsink Copper Kit, 67x18x4mm Cooler Heat Sink + Silicone Based Thermal Pad for Cooling M.2 SSD, NVME SSD, SSD
3. Silicone Thermal Pad Included In order to maximize heat transfer on the contact surface, a low-viscosity, high-thermal-conductivity thermal pad is included to be installed between the M.2 SSD and M.2 heatsink, providing flexibility in installation, and enhances the cooling effect.
Kalolary Soft Thermal Conductive Pad-2 Pcs Double Side Tapes Heatsink Cooling Pad for GPU/CPU/VGA/IC/LED Heat Dissipation (100mmx100mmx1mm+100mmx100mmx2mm)
Made of quality material with excellent thermal conductivity and electrical insulation properties.Can meet the thermal conduct electrical insulation requirements of most electronic products
VooGenzek 4 PCS Aluminum Heatsink Cooling Fin, with Heat-conducting, Circuit Board Cooling Fin, with Thermal Conductive Adhesive Tape, for Electronic Components, 40*40*11 mm, Black
Easy to Use This heatsink come with thermal conductivity adhesive ,which can provide good cooling results. As long as the film is removed, it can be glued to the part that needs heat dissipation.
DS Aluminum Heat Sink 1500RPM Fin CPU Cooler, Aluminum Extrusion Cooling CPU Fan for LGA 775/1155/1156 (Axis Rainbow Auto Change, C Series)
DS Aluminum Heat Sink 1500RPM Fin CPU Cooler, Aluminum Extrusion Cooling CPU Fan for LGA 775 1155 1156 Axis Rainbow Auto Change, C Series
Diymore Peltier Module TEC1-12706 Heatsink Thermoelectric Cooler Peltier Element 12V 6A 60W for Cooling Heating Pack of 2
Power Qcmax 50-60W
£ 8.59
VooGenzek 20 PCS Heatsinks for Raspberry Pi 4 Model B, Aluminum Heat Sink Cooler Kit, with Thermal Conductive Adhesive Tape, for Cooling Raspberry Pi, Black
Package Includes There are four sizes, 7*7*3 mm, 7*7*6 mm, 9*14*5 mm, 14*14*4 mm Aluminum Heat sinks, 5of each type to meet your daily needs.
ARCTIC M2 Pro - Heatsink cooler for M.2 2280 SSD, with ARCTIC TP-3 thermal pads, compatible with PC & PS5, for dual and single-sided SSDs - Silver
EFFICIENT HEAT DISSIPATION lower SSD heat and faster cooling. Thanks to its additional mass, the ARCTIC M2 Pro effectively dissipates heat and transfers it to the environment
AZDelivery TEC1-12706 12V Thermoelectric Cooler Peltier Heatsink Plate, -30°C to 70°C, 60W 6A TEC 3A 5.8A Cooling Heat Sink Element Device Module including E-Book!
Easy to install and operate You can get ice cold or bring something to a boil by simply reversing the polarity, operating temperature ranges from -30 C to 70 C
BSFF Thermal Paste, 1.8g with Toolkit CPU Paste Thermal Compound Paste Heatsink for IC/Processor/CPU/All Coolers, Carbon Based High Performance
HIGH DURABILITY BS-139 thermal paste Edition formula has excellent component heat dissipation performance and has the stability to push the system to the limit.
JLJ Thermal Paste with Tool Kit, 3G CPU Paste Thermal Compound Paste Heatsink for IC/Processor/CPU/GPU/PS4/All Coolers, Carbon Based High Performance, Thermal Interface Material
BETTER THAN LIQUID METAL High Thermal Conductivity, it is composed of carbon particles and has extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is effectively dissipated.
Thermalright Peerless Assassin 120 CPU Air Cooler,6 Heat Pipes, Dual 120mm TL-C12 PWM Fan,Aluminium Heatsink Cover,AGHP Technology,for AMD AM4/AM5 Intel LGA 1150/1151/1200/2011/2066/1700/1851 (PA120)
2 PWM Fans TL-C12 fan 2; Standard size PWM fan 120x120x25mm (4.72x4.72x0.98 inches); Product weight 1.02kg(2.25lb); fan speed (RPM) 1500rpm 10%; power port 4pin; Voltage 12V; Air flow 66.17CFM(MAX); Noise Level 25.6dB(A), leave room for memory-chip(RAM), so that installation of ice cooler cpu is unrestricted.
free delivery
5Pcs Aluminum Heatsink 40 x 20 x 40mm Cooler Heat Sink Fin Radiator for Cooling GPU IC Chips(black)
Heat Sink Size Approx. 40 x 20 x 40mm 1.6 x 0.8 x 1.6in
free delivery
sourcing map 1PC Large Aluminum Heatsink, 4.7" x 3.9" x 0.7" Heat Sink Silver Tone Cooling 16 Fins for IC Module, LED, Amplifier Transistor
Aluminum Material Aluminum heatsink is made from high-quality aluminum alloy, heat sink has excellent thermal conductivity and high hardness.
free delivery
Awxlumv 10PCS 20mm Heatsink Kit 20x20x10mm/ 0.79x0.79x0.39inch with Thermal Conductive Adhesive Tape, Cooler Heat Sink for Cooling GPU IC Chips VRAM VGA RAM
Used for Electronic,CHIP,IC,Diode,Triode,MOS, computer 's component heat dissipation,or anywhere you need a small efficient heatsink.
PC Thermal Paste - Thermal Paste for CPU | Thermal Conductive Composite Grease, High Performance Heat Sink Compound, Heat Grease with High Thermal Conductivity, CPU Paste, CPU Cooler
Distinctive piston design By using ABS and silicone grease in the piston design, our thermal paste offers a longer shelf life for environmentally friendly long-term preservation and is a cost-effective option with sustainable performance.
free delivery
Thermalright Peerless Assassin 120 SE ARGB CPU Air Cooler,6 Heat Pipes Aluminium Heatsink Cover, for Intel 1700/115X/1200, AMD AM4/AM5
AGHP technique 6 6mm heat pipes apply AGHP technique, Solve the Inverse gravity effect caused by vertical horizontal orientation,6 pure copper sintered heat pipes & PWM fan & Pure copper base&Full electroplating reflow welding process, When CPU cooler works, match with ultra-silent airflow fans, aim to extreme CPU cooling performance.
free delivery
AZDelivery 3 x Passive Black Heatsink 2 pcs Cooler Set for Raspberry Pi Models A + B including eBook
These heatsinks are easy to mount on your Raspberry Pi, and are designed for sticking on the device.
GeeekPi 8pcs Pure Copper Heatsinks for Raspberry Pi 5, Heatsinks CPU Cooler with Thermal Conductive Adhensive Tape for Raspberry Pi 5
Compatibility Perfectly compatible with Raspberry Pi 5.
sourcing map 22mm x 15mm x 10mm TO-220 Aluminum Heatsink for Cooling MOSFET Transistor Diodes 10pcs
MAIN PARAMETER small heatsink with a M3 size hole; overall size 22 x 15 x 10 mm 0.87 x 0.6 x 0.4 inch (L*W*H); color silver tone.
Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4B Heatsink/Radiator for Raspberry Pi 4 Model B & Pi 4 Expansion Board Support POE Extension
About Thermal Tape Added 1pc thermal tape, which is unesential, only need it when there is a gap between pi & heatsink
VooGenzek 20 PCS TO-220 Aluminum Heatsink & Insulator/Mounting Kits for MOSFET Transistor, TO-220 Heatsink with Needle + M3 Screw + Screw Washer + Insulator Rubberized Silicone, 20x15x10 mm
Package Includes 20pcs TO-220 Aluminum Heatsink, 20pcs M3 Screw, 20pcs Screw Washer, 20pcs Insulator Rubberized Silicone, 1pc Screwdriver.
sourcing map Silver Tone Aluminum Radiator Heatsink Heat Sink Cooling Fins Cooler for Led Amplifier Transistor IC Module, 100x25x10mm/4"x1"x0.4" (Pack of 5)
Preventing Overheating Aluminum heatsink can reduce the power loss of the device, provide efficient heat dissipation for electronic devices and other components, which prevent overheating and damage caused by excess heat.
free delivery
Awxlumv 4PCS Heat Sink Kit 40x40x20mm/ 1.57"x1.57"x0.79", Anodized Aluminium Heatsink Heat Sync Cooler 40mm for Cooling CPU VRM GPU Led Thermoelectric Peltier Cooler 3D Printers Stepper Motor
1. Improved version 2024, 40mm anodized aluminum heat sinks, flatter base plate and thick enough base material. Smooth surface without scratches and burrs.
Thermalright HR-09 2280 SSD heatsink, Double-Sided Heat Sink, with Thermal Silicone Pad for M.2 SSD PC and Computer
Specifications Size 79*24*48mm body material aluminum alloy color silver gray 6mm 1 AGHP generation 3 reverse gravity heat pipe pure aluminum electroplating base carry 14.8w m.k double-sided second-generation Odyssey silicone pad 45000mm heat dissipation area Number of fins 32pcs thickness 1.8mm gap aluminum fins
Aluminium Heatsink, CTRICALVER M.2 SSD heat sink, with thermal conductive adhesive, suitable for LED amplifier(2pcs, black)
Content Radiator (black) 2, thermal conductive adhesive 2, rubber band 4
GeeekPi Aluminum Alloy CNC Heat Sink Passive Cooling Case Cooler for Raspberry Pi Compute Module 4 CM4 Motherboard(Without fan)
Technology support https wiki.52pi.com index.php Aluminum_Alloy_CNC_Heat_Sink_without_Fan_for_Raspberry_Pi_CM4_Module_SKU _ZP-0111
sourcing map 20Pcs 9x9x5mm Heatsink Aluminum Radiator Heat Sink Cooling with Fixed Sticker for Chip CPU, Power Transistor, FET, IC, Power Amplifier,Black
The size is measured by manual, please allow the error + -0.1 inch before purchasing.
4 PCS M.2 SSD Heatsink, VooGenzek Aluminium Heatsink, with M.2 SSD Screws and Thermal Conductive Adhesive Sheet, Screwdriver, for M.2 Heatsink Laptops and Desktops, 70X22X3mm, Silver
High Quality Aluminum Made of high quality aluminum, great thermal conductivity. An aluminum heatsink is a passive heat exchanger that efficiently transfers heat through electronic signal or mechanical signal with device.
EZDIY-FAB M.2 SSD Heatsink 2280, Double-Sided Heat Sink, High Performance SSD Radiator for PC / PS5, PCIe NVMe or SATA - Silver
Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
M.2 SSD heat sink with thermal conductive adhesive sheet to prevent thermal runaway Heat sink heat sink CPU IC chip circuit board suitable for LED amplifier aluminum 70mm × 22mm × 3mm
radiator material aluminum, size 70mm 22mm 3mm
Awxlumv 2Pcs Aluminum Heatsink 100 x 40 x 20mm/ 3.94x1.57x0.79 inch Heat Sink Chipset Diffusion Cooling Fin Comb Heat Sinks Cooler for LED Peltier Thermal Module Tec1-12706 High Power Amplifi
Product Name Cooling 11 Fin high power heatsink; Material Aluminium
Cooling Fin, CTRICALVER 4 PCS Heatsink, Aluminum Heatsink With Blue Termal Conductive Adhesive Tape, for Cooling 3D Printers, L 40 mm x W 40 mm x H 11 mm (Silver)
Aluminum Heatsink Color silver;Size 40mm x 40mm x 11mm;Good Cooling,Easy Installation. The gap of heatsink between the fins greatly increase the heat dissipation area and provide a greater heat transfer. (Varies depending on the environments)
Thermalright HR10 2280 SSD Heatsink Cooler,Double-Sided Heat Sink,With 2×5mm Heatpipes AGHP Tochnology, With Thermal Silicone Pad for M.2 2280 SSD Cooling,Computer High Performance 2280 SSD Cooler
Heat pipe technology HR10 2280 with 5mm 2 pure copper heat pipe, the heat pipe of AGHP 3rd generation technology adopts double-tube double-lamination welding technology, which solves the influence of vertical horizontal two directions against gravity, and can improve the conduction efficiency of a single heat pipe.The unique top design makes the SSD hard drive heatsink more classic.
AZDelivery Passive Black Heatsink 2 pcs Cooler Set for Raspberry Pi Models A + B including eBook
These heatsinks are easy to mount on your Raspberry Pi, and are designed for sticking on the device.
Awxlumv 2Pcs Heatsink Kit 100x60x10mm with Thermal Conductive Adhesive Tape, Cooler Heat Sink for Smartphones, Routers, Hard drives, Game consoles, LED amplifiers, etc
1. Size and shape Product size 100mm x 60mm x 10mm; Color black; Shape rectangular. Aluminium Alloy heatsinks
Thermalright TF4 4g Thermal Compound Paste for Coolers, Heat Sink Paste High Durability 9.5W/m.k-4 Grams,Graphic Card CPU Thermal Grease, Laptop Thermal Grease(TF4 4g)
Easy to apply The needle-type designs is convenient for application and storage. the paste is not stiff and comes with a spatula, the moderate viscosity can be easily applied for a Homogeneous thin layer, so that all beginners can easily apply it.
sourcing map Heatsink Copper Pad Shim 15mm x 15mm x 0.3mm Thermal Conductive Heat Sink for Electronic Chip Cooling Pack of 6
The thermal pad is made of copper, which is widely used in various places and is very suitable for cooling chips, notebooks, north and south bridges, memory modules, and other small electronic devices without cooling function.
sourcing map 20Pcs 9x9x5mm Heatsink Aluminum Radiator Heat Sink Cooling with Fixed Sticker for Chip CPU, Power Transistor, FET, IC, Power Amplifier,White
The size is measured by manual, please allow the error + -0.1 inch before purchasing.
4 PCS M.2 SSD Heatsink, VooGenzek Aluminium Heatsink, with M.2 SSD Screws and Thermal Conductive Adhesive Sheet, Screwdriver, for M.2 Heatsink Laptops and Desktops, 70X22X3mm, Black
High Quality Aluminum Made of high quality aluminum, great thermal conductivity. An aluminum heatsink is a passive heat exchanger that efficiently transfers heat through electronic signal or mechanical signal with device.
Awxlumv Aluminum Heat Sink Large Heatsink Module Cooler Fin for High Power Transistor Semiconductor Devices 3.93"(L) x 3.93"(W) x 0.71"(H) /100mm(L) x 100mm(W) x 18mm(H)
5. Application Computer, FET, IC, power amplifier, voltage regulator, MOSFET, SCR etc
Thermalright TF4 4g Thermal Compound Paste for CPU Coolers, Heat Sink Paste High Conductivity 9.5W/m.k For All Processors(CPU,GPU),4 Grams, Non-Conductive,With A Spatula Tool(TF4 4g)
Easy to apply The needle-type designs is convenient for application and storage. the paste is not stiff and comes with a spatula, the moderate viscosity can be easily applied for a Homogeneous thin layer, so that all beginners can easily apply it.
GeeekPi Armor Lite V5 Aluminium Heatsink with PWM Fan, Raspberry Pi 5 Compatible, 30mm Cooling Fan, Thermal Pads for Raspberry Pi 5 4GB/8GB
Package Includes 1 x Armor lite heatsink with pwm fan for Raspberry Pi 5, 1 x Screw driver, 2 x Screws, 4 x Thermal Pads, 1 x User Manual
sourcing map 2 Pack M.2 2280 Nvme SSD Heatsink Cooler with Thermal Pad Alloy Aluminum Heat Sink Cooling Sink for Laptop, 70x22x3mm, Black
Remove the old radiator from the computer, and then install the new radiator on the computer with a screwdriver tool
sourcing map Heatsink Copper Pad Shim 20mm x 20mm x 0.3mm Thermal Conductive Heat Sink for Electronic Chip Cooling Pack of 6
The thermal pad is made of copper, which is widely used in various places and is very suitable for cooling chips, notebooks, north and south bridges, memory modules, and other small electronic devices without cooling function.
GeeekPi Aluminum Alloy CNC Heat Sink with PWM Fan,Passive Cooling Radiator for Raspberry Pi Compute Module 4 CM4 Motherboard(With Fan)
Package Inlcudes 1 x Aluminum Alloy CNC Heat Sink with PWM Fan for Raspberry Pi CM4 Module;1 x Screw Driver;4 x M2.5 Screw;4 x M2.5 Nuts;4 x Thermal Pad
Heat Sink, CTRICALVER Aluminum Heatsink Thermal Pad Cooler14 x 14x7mm(L xW xH), for Cooling 3D Printers (20 pcs, gold)
------Application Effectively for cooling 3D printer, the motors couldn't sink heat into the frame, and heatsink will reduce the temperature of stepper motors.
2 Pack NVMe Heatsink Cooler Aluminum M.2 Heatsink for 2280 M.2 SSD with Thermal Pad for PC/PS5/PS5 Slim Installation, Heat Sink Cooling Sink 70x22x3mm, Black
High-Quality Aluminum Construction Crafted from premium aluminum alloy, this M.2 SSD heatsink provides excellent heat dissipation and static resistance. The anodized black surface enhances durability and ensures efficient cooling performance. Designed for PC, PS5, and PS5 Slim, but not compatible with laptops.
VooGenzek 20 PCS Aluminum Heatsink Cooling Fin Kit, Fin Heatsink Module, Heatsink with Heat-conducting, with Thermal Conductive Adhesive Tape, for Cooling Electronic Components, Black
Package Includes There are four sizes, 7*7*6mm, 9*9*5mm, 10*14*6mm, 14*14*6mm Aluminum Heat sinks, 5 of each type to meet your daily needs.
2Pcs 40mm Heatsink 80x40x11mm/ 3.15 x 1.57 x 0.44 inche Aluminum Heat Sink Radiator Cooler with Thermal Conductive Adhesive Tape/Pad Cooling Fin for Cooler Electronics CPU Led, Black
5. Effective Passive Cooling For water cooling modules, also for cooling CPUs, LEDs, and various electronics, such as for passive cooling of router, HF Radio Transceiver, pi, FPV transmitters, M2 NVMe enclosure, SD external drive, battery cjharger, 3D printers, etc
CTRICALVER 4 Pack M.2 SSD Heatsink, 70x22x3mm Aluminum Heat Sink, with Silicone Thermal Pads for M.2 2280 SSD (Red)
Silicone pad The thermal conductivity is good. The flexible thermal silicone pad is very light and easy to install. The aluminum heat sink and silicone pad can achieve double heat dissipation.
Heat Sink, CTRICALVER 4 Pcs Red Aluminium Heat Sink, Cooler Heat Sink for Cooling 3D Printers With Blue Thermal Conductive Adhesive Tape, 40mm x 40mm x 11mm
"Thermal runaway countermeasure" This is a large radiator that can be used as a countermeasure for rectangular electronic equipment. The use of this product will increase the operating efficiency of the equipment
6% discount
AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler with Aluminum Heatsink & 3.93-Inch Fan (Slim)
Direct screw mounting to socket AM4 motherboard
£ 15.95
Awxlumv Aluminum Heat Sink 150mmx93mmx15mm/ 5.9x3.66x0.59 inch High Power Large Heatsink Module Cooler Fin for PCB Board LED Motherboard Cooling GPU Backplate Radiator Routers RTX 3090 3080 Black
4. This large big aluminum heatsink is passive cooling, reduces the risk of hardware failure and power loss due to overheating, more safety.
VooGenzek 20 PCS TO-220 Aluminum Heatsink & Insulator/Mounting Kits, TO-220 Heatsink + M3 Screw + Screw Washer + Insulator Rubberized Silicone, for MOSFET Transistor, 20x15x10 mm
Package Includes 20pcs TO-220 Aluminum Heatsink, 20pcs M3 Screw, 20pcs Screw Washer, 20pcs Insulator Rubberized Silicone, 1pc Screwdriver.
Thermalright M.2 2280 Pro SSD Heatsink, 8mm Heatpipe, High Performance Double Side Thermal pad
Fine workmanship Solid radiator All-aluminum heat sink anode sandblasting process with 8mm heat pipe 2280 specification double layer silicone sheet
Radiator Thermal Conductivity Thermal Runaway Measures L40mm X W40mm X H11mm 4pcs Black Heat Sink Aluminum Radiator Fire Tv Diy Kit Ic Chip Mosfet Circuit Board Suitable For High Power Led Amplifier
"Thermal runaway countermeasure" This is a large radiator that can be used as a countermeasure for rectangular electronic equipment. It can be used for heat dissipation in PC CPU, IC chip, power adapter and various small electronic devices. The use of this product will increase the operating efficiency of the equipment and prolong the danger of use.
Thermalright HR10 2280 PRO SSD Cooler,2280 SSD Heatsink Cooler,Double-Sided Heat Sink,4 Heat pipes, With Thermal Silicone Pad for 2280 SSD PC and Computer,High Performance SSD Cooler
Compatibility HR10 2280 PRO is suitable for M.2 interface 22 x 80mm SSD cooling, support single-sided and double-sided particle 2280 SSD, (Note does not support ITX motherboard back-mounted M.2 interface), the unique design of the top makes the overall value higher
Awxlumv 2PCS Aluminum Heat Sink 60mmx60mmx15mm With Thermal Conductive Adhesive Tape, Square Module Heatsink Profile Cooling Fin Cooler for Chip CPU Power Amplifier Phone Base Station Router
3. Pre-applied 3M 8810 thermal conductive double side adhesive tape backing
Thermalright TR-M.2 2280 TYPE A B 2280 heatsink for SSD Cooling M.2 2280 heatsink Cooler, Aluminum, with 2 Thermal Conductivity, Desktop High Performance SSD Cooler, Black
Brand Overview Thermalright is a Taiwan brand with a history of over 20 years of development. It has a certain popularity in domestic and international markets and has a significant influence in the radiator market. We have been focusing on the research and development of computer accessories. The R&D product line includes CPU coolers, case fans, thermal silicone pad, thermal paste, CPU fan controllers, mounting brackets and other goods.
Awxlumv Large Heatsink Aluminum 4.72" x2.71" x 1.41" / 120mm x 69mm x 36mm High Power Heat Sink Diffusion Cooling Module Cooler 27 Fin Radiator for Led Amplifier PCB IC Module PC Computer Led
1. Name Large Heat sink Cooling Fin Large Heat Sync; Material Aluminium ( anodized aluminum). Color Sliver.
Aluminum Heatsink-2Pack Kalolary Radiator Chipset Heat Sink Cooling Fin with Thermal Pad for NVME NGFF M.2 2280 PCIE SSD,DIY Laptop PC Memory Cooling Fin Radiation
High-quality material Aluminum alloy, silver plating(Helps eliminate static electricity), anodic oxidation surface treatment (Thermal conductivity of the heatsink 560W mK).
Thermalright HR09 2280 PRO SSD 2280 Heatsink, Double Sided Heat Sink Cooler, with Thermal Silicone Pad,for Desktop High Performance SSD Cooler(HR09 2280 PRO)
Specifications Size 86*24*74mm body material aluminum alloy color silver gray 6mm 2 AGHP generation 3 reverse gravity heat pipe pure aluminum electroplating base carry 14.8w m.k double-sided second-generation Odyssey silicone pad 7500mm heat dissipation area Number of fins 33pcs thickness 1.8mm gap aluminum fins
Plomevry 4 Pcs Aluminum Heatsink Shim Spreader Cooler Cooling for DDR RAM Memory Desktop Memory Radiator DDR2 DDR3 DDR4
Easy installation with spring clips.
M.2 SSD heat sink with thermal conductive adhesive sheet to prevent thermal runaway Heat sink heat sink CPU IC chip circuit board suitable for LED amplifier aluminum 70mm × 22mm × 6mm (2 pieces, gold)
radiator material aluminum, size 70mm 22mm 6mm
Awxlumv Aluminum Heatsink 60x150x25mm / 2.36x5.91x0.98 Inch Heat Sink Radiator for CPU MOS Tube Circuit Board PCB Heat Sinks Led Cooling Cooler Amplifier Devices with 24 pcs Fins - Sliver
1. Size 150 x 60 x 25mm 5.91" x 2.36" x 0.98" (L*W*H)
AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler with Aluminum Heatsink & 3.93-Inch Fan (Slim)
AMD Wraith Stealth Socket AM4 4-Pin Connector CPU Cooler with Aluminum Heatsink & 3.93-Inch Fan Slim
Awxlumv 4PCS 50mm Aluminum Heatsink Kit 50x50x20mm/ 1.57" (L) x 1.57"(W) x 0.79"(H) Heat Sink Cooler for GPU CPU Peltier Plate Module Router Amplifier Led Chipset Heat Radiator Cooling Fin (Sliver)
1. Size 1.97"(L)x1.97"(W)x0.78"(T) 50mmx50mmx20mm.
Thermalright TFX 2g Thermal Paste Heat Sink Compound 14.3W/m.k-2 Grams, High performance thermal paste for Processor/CPU/GPU/IC/All Coolers, With a Spatula Tool(TFX 2g)
High performance Excellent performance comes from its first-class data, thermal conductivity up to 14.3W m.k, it has a good record of high cooling performance, Its high thermal conductivity ensures the speed and efficiency of heat conduction, which is the choice of overclocking game player.
Thermalright HR-09 2280 PRO Black 2280 SSD heatsink, Double-Sided Heat Sink, AGHP Technology 2 Heatpipes With Thermal Silicone Pad for 2280 SSD PC and Computer
Brand Overview Thermalright is a Taiwanese brand with more than 20 years of development history. It has a certain popularity in the domestic and international markets and has a decisive influence in the cooler market. We have been focusing on the research and development of computer accessories. The R&D product line includes CPU coolers, case fans, silicone pad, thermal paste, mounting brackets, accessories and other products.
JZK CPU I30 Cooler Fan with Heatsink for Intel Sockets 115X 1200 1151 1150
Fan Dimension 92mmx92mmx25mm
4PCS 50mm Heatsink 1.97x1.97x0.43 Inch/ 50mmx50mmx11mm Heat Sink Aluminum Cooler with Thermal Blue Sticker Cooling for Peltier Plate Module Router Amplifier Led Chip CPU Power Transistor FET IC
1. Heatsink Size 1.97"(L)x1.97"(W)x0.43"(T) 50mmx50mmx11mm; Weight 1.16 oz 33gram per, 22x10 fins per
Thermalright HR10 2280 SSD Cooler,2280 SSD Heatsink cooling,Double-Sided Heat Sink,2 Heat pipes, with Thermal Silicone Pad for SSD PC and Computer(Silvery)
Advanced technology Second generation gasket with heat dissipation up to 14.8w m.k, Double tube double lamination welding technology, pure aluminum electroplating passive fin group, pure aluminum electroplating base, aluminum alloy decorative top cover + stainless steel fixed bottom surface, 60000mm Heat dissipation area, bring you the ultimate heat dissipation experience.
Thermalright TR-M.2 2280 TYPE A G Heatsink for SSD Cooling M.2 2280 Heatsink Cooler, Aluminum, with 2 Thermal Conductivity, Desktop High Performance SSD Cooler(Gray)
Brand Overview Thermalright is a Taiwan brand with a history of over 20 years of development. It has a certain popularity in domestic and international markets and has a significant influence in the radiator market. We have been focusing on the research and development of computer accessories. The R&D product line includes CPU coolers, case fans, thermal silicone pad, thermal paste, CPU fan controllers, mounting brackets and other goods.
£ 4.99
Steam Deck SSD Heatsink Thermal Pad: Haojiaho M.2 2230 NVME SSD Graphite Covered Pure Copper Heat Sink with Cooling Thermal Pads for Steam Deck 2230 SSD, SabrentRocket 2230, Rog Ally ssd
1, Heat Sink with Thermal Pad The Heat Sink is designed specifically for Steam Deck 2230 SSD, SabrentRocket 2230, Rog Ally SSD.
Thermalright TF9 1.5g Thermal Paste Heat Sink Compound 14W/m.k, 1.5 Grams,High Durability, Thermal Compound CPU for Processor/CPU/GPU/All Coolers, With applying Tool (TF9 1.5g)
Excellent Performance Excellent performance origins from its outstanding data, the thermal conductivity is (up to) 14W M.K, with a good record of good cooling performance, its high thermal conductivity ensures the speed and efficiency of heat transfer, becomes overclocker customer's Choice
M.2 SSD Heatsink, M.2 Graphene Heatsink Cooler, M.2 Solid State NVME Hard Disk Cooler, Adhesive Heat Sink for M.2 SSD Laptop Memory (2 Pack)
Heat Conductivity Using the better thermal conductivity of graphene, with the help of the internal air duct of the notebook, quickly take away the heat.
Awxlumv Large Aluminum Heatsink 7.09" x2.71" x 1.41" / 180x69x36mm High Power Heat Sink Diffusion Cooling Module Cooler 27 Fin Radiator for Led Amplifier Transistor Semiconductor PC Computer PCB
1. Name Large Heat sink Cooling Fin Large Heat Sync; Material Aluminium ( anodized aluminum). Color Sliver.
Awxlumv Large Aluminum Heatsink 5.9" x2.71" x 1.41" / 150x69x36mm High Power Heat Sink Diffusion Cooling Cooler 27 Fin Radiator for Led Amplifier Transistor Semiconductor PC Computer PCB IC Module
2. Fin 27pcs; Color Sliver; Maximize surface area Designed in contact with the cooling air. The 27pcs fins increase the area of the board and thus provide for greater heat transfer.
for Steam Deck SSD Heatsink Thermal Pad, M.2 2230 NVME SSD Copper Heat Sink Cooling Thermal Paste, Back Cover, Opening Tool Replacements Screwdriver Repair Kit
STABLE OPERATION Thermal copper sheet aids in passive heat dissipation, plus the high performance thermally conductive silicone sheet absorbs solid heat onto the top of the copper sheet, which quickly removes heat through the laptop's internal fan.
Awxlumv Aluminum 80mm Heat Sink 3.15x3.15x1inch/ 80x80x27mm Heatsink Large Radiator Circuit Board Cooling Cooler 26 Fins for LED, Power High Fans - Sliver
2. Weight 7.4 oz ; Base board thickness 6 mm ; Fins board thickness 0.8mm; Fins 26Pcs
Awxlumv M.2 Heatsink NVMe SSD PS5 Heat Sink Computer PC PCIE M2 2280 SSD Cooler with Thermal Silicone pad for PC / PS5 for Samsung 990 980 970 EVO Plus SN850 SN750 SN570 Firecuda 530 Black
Designed for M.2 SSD -The heat sink is specially designed for M.2 2280mm SSD, which is very suitable for desktop computers Playstation 5, etc.
Awxlumv 2Pcs Black Aluminum Heatsink 100mm(L) x25mm(W) x10mm(H) / 4x1x0.4 Inch Heat Diffusion Cooling Fin with Pre Thermal Conductive Tape heat sinks for Cooler Electronics Gpu Led
Material Aluminium; Color Black ; Fins 8Pcs
Awxlumv 40mm Heatsink Kit 40x40x20mm with Thermal Conductive Adhesive Tape, Aluminum Heat Sink Cooler for Cooling 3D Printer Stepper Motor Driver NEMA 17 TEC1-12706 Peltier Plate Module GPU Router
3. These heat sinks perfect fit for cooling of 3D Printer Motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc. Also for GPU backplate LED light Wi-Fi Routers Power Supplies and so on.
GeeekPi Pi 4 Extreme Cooling Fan Kit, Aluminum Heatsink with Cooling Fan for Raspberry Pi 4B & 3B
It's fit for Raspberry Pi 4B and Raspberry Pi 3B+ 3B; It's compatible with most of cases in the market;
M.2 SSD Graphene Heatsink, 2pcs Rapid Cooling NVMe Heatsink, Adhesive Heat Sink for Laptop PC,Precise Thermal Conductivity
Tonysa
4Pcs 14mm Heatsink 100 x 14 x 6mm Black Aluminum Heat Sink Strip Radiator Cooler with Thermal Conductive Adhesive Tape Cooling Fin for Cooler Electronics LED CPU Memory Chip
1.Product Name Cooling 7Fin heat sink strip
GLOTRENDS M.2 Heatsink for 2280 M.2 SSD, Fit for PC/PS5/PS5 Slim Installation, 22x70x3mm Aluminum Body, Including Thermal Pad (2 Packs)
The M.2 SSD heatsink is for PC PS5 PS5 Slim, not for laptops. 22x70x3mm aluminum body, it can work with all 2280 M.2 SSDs.
M.2 Heatsink Copper, M2 NVMe Laptop Copper Heatsink with Silicone Thermal Pads for PCIE SATA M.2 2280 SSD Portable Enclosure Desktop PC Laptop
Ultra-thin Design Thickness 1mm, specially designed for compact spaces, such as laptops, M2 portable enclosure. Compatible with most laptops and desktop computers, supports PCIe NVMe SATA M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
Awxlumv Large Aluminum Heat Sink 2.71"x2.71"x1.41"/ 69x69x36mm Heatsink High Power Cooling Plate 27 Fin Radiator GPU Cooler IC Module PC Computer Led PCB Charger Electronics Amplifier
1. Product Name large heat sink ( anodized aluminum heatsink); Material aluminium; Color sliver. Sufficient materials only for excellent quality
50ML Thermal Paste CPU,Grey Thermal Conductive Glue,PC Thermal Grease,High Performance Heat Sink Compound,High Temperature Resistance Heatsink Thermal Paste,Easy to Spread Thermal Paste for CPU,GPU,PC
Efficient Heat Dissipation This thermal paste cpu is designed to meet the requirements of grey thermal conductive glue.Using pc thermal grease based on advanced thermal conduction technology,high performance heat sink compound ensures that your CPU can maintain the optimal temperature even under heavy load,thereby extending the life of the device and improving performance while using high temperature resistance heatsink thermal paste
Awxlumv for Steam Deck Heatsink Thermal Pad M.2 2230 NVME SSD Copper Heat Sink Cooling Thermal Pastes Back Cover Opening Tools Back Screws Replacements Screwdriver Repair Kit for Stream Deck SSD
5. Package include 1x Copper Heatsink, 2x Phase change thermal pads, 2x Silicone thermal pads,1x screwdriver, 1x Opening pry bar, 1x Triangle Pry Tool, 18x Screws(8 long and 8 short for back plate, 2 for SSD)
CTRICALVER Heatsink, M.2 SSD Heatsink, 4 Pack, Silver, 70x22x3mm Ultra-Sliim Aluminum Heatsink, with Silicone Thermal Pads for M.2 2280 SSD
Package Content 4 x Silver Heatsink,4 x Thermal Pad, 8 x Rubber Rings,comes with a transparent plastic box for easy portability and storage.Heatsink size 70mm 22mm 3mm.Please make sure that the size of these heatsink fits your component or device before buying
Laptop NVMe M.2 Heatsink with Nano Thermal Pads and Mounting Screw,Heat Sink Copper for 2280 M2 SSD, No Rubber Ring Required
Materials and Workmanship - 100% copper, Hard disk heat sink is made of red copper with a thermal conductivity of up to 401W (m.k), cut and polished, high performance thermal heatsink.
[6 PCS] Awxlumv M.2 Thermal Pad, 70x22x1mm for M.2 2280 SSD NVMe PS5 Heatsink 12.0 W/mK
Dimensions - 70x22x1mm Thermal Conductive Silicone Pads Fit for NGFF M.2 2280 (22 x 80mm) PCIE NVME SSD Heatsinks.