132 cross chisel on offer(Disclaimer)
-
➤ Current offers in price comparison
-
➤ Versatile options always in focus
-
➤ Last checked on 08.10.2026
Filter
19% discount
12PCS SDS-Plus Drill Bit & Chisel Set, 8PCS Cross Hammer Drill Bits(6/8/10/12x150mm, 6/8x110mm) + 4PCS Concrete Chisels (14/20/40x250mm), Tungsten Carbide Tip for Concrete/Brick/Stone, Hex/Round Shank
【12PCS Versatile Set】Includes 8 drill bits (6x110mm, 8x110mm, 6x110mm×2, 8x150mm×2, 10x150mm, 12x150mm) + 4 chisels (14x250mm pointed/U-shaped, 20x250mm flat, 40x250mm wide). It covers common drilling and chiseling needs, making it perfect for DIY enthusiasts and decorators working with hard materials like concrete and brick.
Check price
15% discount
Trend FastTrack Diamond Fine Finishing Stone, 600 Grit, Perfect for Knives, Chisels & Tools, FTS/S/FF
OPTIMAL ABRASION: Monocrystalline diamond surface with unique Diamond Cross relief pattern, maximising sharpening efficiency and minimising clogging for a fine 600 grit finish.
Check price
13% discount
Faithfull FAICM90HD Wood Carvers Beech Mallet 90mm (3.5in) 440g (15.5oz)
The Faithfull Carvers Mallet is manufactured from close grain beech The circular cross section handle helps make the mallet comfortable to use The Beech handle is permanently wedged and glued to the single piece head.
Check price
12% discount
Irwin TM3731 Splitof B/E Chisel, 25mm
The Blade bolster and tang are forged from one-piece of steel Edges bevelled to enable easier working in tight corners They are fitted with two-tone splitproof plastic handles The handle is also contoured to provide added control Size: 25mm
Check price
6% discount
STANLEY 12 Piece Punch and Chisel Set Includes Centre, Pin Punches and Cold Chisels, 4-18-0299
Perfect for cutting and shaping metal and marking out centre lines, hole locations and pilot drill starting points Made from chrome vanadium steel which has been treated by quenching and tempering to strengthen and harden the steel for improved product life One-piece forged construction for added durabilityand powder coated finish for increased visibility and corrosion protection Set Content: Punches -1.5 mm, 2mm, 3 mm, 4 mm, 5 mm, 2x6 mm, 2x8 mm, Chisels - 10 mm, 12 mm, 16 mm
Check price
Unior/6 Cross Chisel, 200 mm
Material: Chrome Vanadium Forged Lackiert Cross Chisel, 200
free delivery
Check price
PB Swiss 815/6 Cross-Cut Chisels by PB Swiss
PB SWISS TOOLS
free delivery
Check price
Cycle TIP 10X5X130mm OCTOGONAL
PB SWISS TOOLS
free delivery
Check price
Narex Piercing Chisel Premium Ground - 20 mm
The Premium Piercing Chisel Have a Improved Cross Section The Blade The Ergonomic white beech handle is strong enough to withstand heavy blows The blades are traditionally forged from Cr-Mn steel and heat treated to 59 HRC with
free delivery
Check price
Narex Piercing Chisel Premium Ground - 16 mm
The Premium Piercing Chisel Have a Improved Cross Section The Blade
free delivery
Check price
Narex Piercing Chisel Premium Ground - 22 mm
The blades are traditionally CR-V MN Steel Forged And With to 59 HRc heat treatment The ergonomic white beech handle is strong enough to withstand severe impacts
free delivery
Check price
PB Swiss Tools Special Quality Mechanic Cross Chisel 120mm
PB SWISS TOOLS
free delivery
Check price
NS Cross Cut Chisel CU-BE 200
Made from beryllium copper | Intended use for creating grooves and notches Flat oval shape | Anti-magnetic properties and high corrosion resistance Intended use for creating grooves and notches | For more information on restrictions on the use of anti-spark materials, consult the corresponding certificates Conforms to product standard DIN 6451 Anti-spark tools designed for use in potentially explosive atmospheres where “traditional” steel tools could generate sparks
free delivery
Check price
NEO Chisel with Protection 300 x 50 mm CRV Steel 18 mm Hex Cross Section
x
free delivery
Check price
PB Swiss Tools Special Quality Mechanic Cross Chisel 150mm
PB SWISS TOOLS
free delivery
Check price
KS Tools 9632473 Bronze Plus Cross Chisel 300 mm
One piece Bronze plus cross chisel, 300 mm Ideal product for regular use Very good quality product
free delivery
Check price
Narex Firmer Chisel, Wood LINE Plus 6 mm
The blades are traditionally forged steel and CR-2032 MN with up to 59 HRc heat treatment The ergonomic white beech handle is strong enough to resist serious beats Special tool for coarse work.
free delivery
Check price
Narex Bevel Edge Chisel Premium Polished - 50 mm
The blades are traditionally forged from Cr-Mn steel and heat treated with up to 59 HRC The blades are polished The premium chisels have an improved cross-section of the blade The ergonomic white beech wood handle is strong enough to withstand heavy impacts
free delivery
Check price
Narex Paring Chisel with Cranked Neck - 6mm (1/4")
The blade is traditionally forged from Cr-Mn steel.
free delivery
Check price
Stanley 2-16-384 "Bailey" Chisel, Silver/Brown, 10 mm
STANLEY
free delivery
Check price
NEO Chisel with Protection 300 x 35 mm, CRV Steel, 18 mm, Hexagonal Cross Section
x
free delivery
Check price
Unior 670/6 601747 Cross Chisel 150 mm Black
Material: chrome vanadium Forged Varnished Cross Chisel 150
free delivery
Check price
Narex Bevel Edge Chisel Set with Wooden Handles, Set of 4 pcs
Blades are made from highly alloyed Cr-Mn steel, hardened up to Rc 59. Meets DIN 5139 requirements.
free delivery
Check price
Narex Bevel Edge Chisel with Wooden Stained Handles, 4 pcs
Quality blades forged from Cr-Mn steel guarantee the highest cutting stability Blades have been heat treated, have a hardness of 59 HRc (Rockwell hardness) The blades are already sharpened ready to use.
free delivery
Check price
Narex Chisel/Multifunction Chisel - 32 mm
Chisel / Multifunction Chisel - 32 mm
free delivery
Check price
OX Pro Electricians Chisel - 2¼" X 10"
OX Pro Electricians Chisel - 21⁄4" X 10"
free delivery
Check price
Ega Master 62874 - Crosscut Chisel 8 X 200 Mm
Ega-Master
free delivery
Check price
![Narex Chisels/Wood Chisel for Dovetailing 12.70 mm [0.5 inch]](https://cdn.dealcheck.org/productimages/I/B/7/B00J8KM7BI.jpg)
Narex Chisels/Wood Chisel for Dovetailing 12.70 mm [0.5 inch]
The Handle Consists of Beech Wood and is stained and Painted 3 different sizes to choose from Up 59 HRC Heat Treated The Blade is Traditional from cr-mn-stahl Forged
free delivery
Check price
Faithfull Wood Carving Chisel Set of 12 in Wooden Storage Case - FSC® | Wood Carving Chisels, Walnut Handles, Iron Ferrules, Polished 60CrV Steel Blades, 12-Piece Set with Wooden Storage Case
Durable 60CrV Steel Blades for Reliable Performance – Manufactured from 60CrV steel and hardened to 56-60 HRC, the blades provide durable cutting performance for detailed woodcarving, shaping and hollowing work across a range of hard and soft woods.
free delivery
Check price
KS TOOLS 963.2480 BRONZE + Cross cut chisel hexagon 200 mm
KS Tools - professional hand tools Bédane bronzeplus L 200 x H 14 mm
free delivery
Check price
Ega Master 62876 - Crosscut Chisel 9 X 300 Mm
Ega-Master
free delivery
Check price
STANLEY FATMAX 12" Cold Chisel with Guard, 4-18-0332
Perfect for cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminium, cutting bolts, nuts and rivets Made from chrome vanadium steel which has been treated by quenching and tempering to strengthen and harden the steel for improved product life Hardened, quenched and tempered to precise specifications for added safety Bi-material hand guard for increased comfort and protection from overstrike from hammer during use Powder coat finish for increased visibility and corrosion protection
free delivery
Check price
Narex Bevel Edge Chisel Set in Wooden Box, Set of 6 pcs
Blades: forged from highly alloyed Cr-Mn steel, heat treated up to 59 HRc fully ground and sharpened meet DIN 5139 requirements Handle: ergonomic with oval cross-section stained and waxed, with steel ferrule and hoop
free delivery
Check price
KS TOOLS 963.2471 BRONZE + Cross cut chisel flat oval 200 mm
EAN: 4042146522882 Colour: Bronze Package weight: 4,850 lb
free delivery
Check price
Hultafors 390295 Heavy-Duty Chisel - Multi-Colour (Pack of 4)
The Hultafors Set of 4 HDC Heavy-Duty Chisels, that have a perfect ground blade, bevelled at 25 deg; for the best ratio possible between sharpness and durability Product weight: 1.765kg Wood Chisels
free delivery
Check price
![Narex Chisels/Wood Chisel for Dovetailing 19.05 mm [0.75 inch]](https://cdn.dealcheck.org/productimages/I/T/W/B00J8KTWTI.jpg)
Narex Chisels/Wood Chisel for Dovetailing 19.05 mm [0.75 inch]
The Handle Consists of Beech Wood and is stained and Painted 3 different sizes to choose from Up 59 HRC Heat Treated The Blade is Traditional from cr-mn-stahl Forged
free delivery
Check price
8"x3/8"x3/4" Cross Cut Cold Chisel
Kennedy
free delivery
Check price
Narex 863600Chisel / Mortise Chisel Set - 4/6 / 10/12 mm - for Mortises
Robust tool used for chopping out joints as well as cutting mortises Excellent cutting performance is reached by side tapering in height and length from tip to shoulder for sidewall clearance The blade is forged from Cr-Mn steel and heat treated up to 59 HRc The handle is made of dark stained and waxed beech wood with steel ferrule and hoop
free delivery
Check price
KS TOOLS 963.2470 BRONZE + Cross cut chisel flat oval 150 mm
in accordance to DIN 6451 flat oval form burr-free cutting non-sparking explosion proof corrosion resistant wear resistant aluminium-bronze (Non-Ferrous-Alloy)
free delivery
Check price
Narex Skew Woodturning Chisel (Left Hand)
Heat-treated to a hardness of up to 64 HRc
free delivery
Check price
Narex Bevel Edge Chisel Premium Polished, Wood LINE Plus 32 mm
The blades are traditional made from chrome MN steel forged and with to 59 HRc heat treated The blades are polished The premium ripping chisel have an improved Cross Section of blade The ergonomic White beech wood handle is strong enough to withstand heavy shock
free delivery
Check price
Narex Bevel Edge Chisels Premium Polished in Wooden Box – Set of 6 pcs
Blades are made from highly alloyed Cr-Mn steel, hardened up to 59 HRc and polished.
free delivery
Check price
KS Tools 162.0293 Cross chisel with hand grip, flat, oval, 8x250mm
One piece Power source: hand-operated Flat Oval Cross Chisel with Hand Guard Handle 250 mm
free delivery
Check price
Silverline Bolster Chisel with Guard 70 x 216mm (781710)
Forged, single-piece solid steel Ground, hardened & tempered cutting edge Double-injected, soft-grip hand guard Powder coated for corrosion resistance For demolition, cutting & shaping of bricks & blocks
free delivery
Check price
SDSPlus 7-Piece Concrete Drill Bit Set Double Cross Head Concrete Drill Chisel
Set of 7 Double Cross Head + Concrete Drill SDS Plus Chisel Concrete Drill Bits
free delivery
Check price
KS Tools 162.0294 Cross chisel with hand grip, flat, oval, 9x300mm
Laugh-oval shape Regrindable cutting edge Working ends fully hardened
free delivery
Check price
Narex Piercing Chisel - Flat with Dark Grip - 10 mm
Blade length: approx 100mm (4in) Overall length: approx 270mm (10.6in) Handle: Stained beech with chromed steel ferrules.
free delivery
Check price
STANLEY 5002 Series 3 Pieces Chisel Set 0-16-128
Designed for Tradesmen Hardened and tempered alloy steel blade Laquered for rust prevention Impact resistant handle Set of 3
free delivery
Check price
Narex Piercing Chisel - Flat with Dark Grip - 32 mm
Blade length approx 100mm (4in) Overall length approx 270mm (10.6in) Handle: Stained beech with chromed steel ferrules.
free delivery
Check price
KS Tools 963.2483 – Bronze + Cross Cut Chisel Hex 400 mm
Non-sparking Explosion proof International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
free delivery
Check price
Stubai 104300 Cross Cut Chisel, Red/Silver, 200 x 13 mm
Dimensions: 200mmxSW13mm
free delivery
Check price
Narex Piercing Chisel - Flat with Dark Grip - 50 mm
Blade length: approx 100mm (4in) Overall length: approx 270mm (10.6in) Handle: Stained beech with chromed steel ferrules.
free delivery
Check price
Narex Piercing Chisel - Flat with Dark Grip - 14 mm
Handle: Stained beech with chromed steel ferrules.
free delivery
Check price
Narex Piercing Chisel - Flat with Dark Grip - 16 mm
Blade length: approx 100mm (4in) Overall length: approx 270mm (10.6in) Handle: Stained beech with chromed steel ferrules.
free delivery
Check price
Pferd 18801226 1215 FLST 175 (1) Chisel Bit File
Chisel Bit File Flax Blunt are suitable for repairing and sharpening saw chains with square teeth – ideal for grinding edges on saw chains The flat file can be used for sharpening the cutting edge as well as reducing the depth limiter The plastic packaging protects against dirt and damage to the file, the rear opening allows you to remove and retract Box contents: 1 x horse chisel bit file flat blunt / cross section 3.3 mm x 12.4 mm / length 175 mm / cut 2 / in a plastic bag
Check price
Ega Master 73778 - Cross Cutting Chisel 140 Mm Non Sparking Cu-Be.
Hydraulic lifting equipment and
free delivery
Check price
Narex Piercing Chisel - Flat with Dark Grip - 26 mm
Blade length: approx 100mm (4in) Overall length: approx 270mm (10.6in) Handle: Stained beech with chromed steel ferrules.
free delivery
Check price
Stubai 104301 Air-Hardened Cross-Cut Chisel, Silver/Red, 250 mm
High alloyed and lacquered
free delivery
Check price
Narex Bevel Edge Chisel Premium Polished, Wood LINE Plus 4 mm
Forged from highly alloyed Cr-Mn steel Ergonomic with a round cross-section Stained hornbeam wood The 3mm size does not have a bevelled edge. The rest of the sizes do.
free delivery
Check price
Stubai 104303 Cross-Cut Chisel Air-Hardened, Silver/Red, 350 mm
High alloyed and lacquered
free delivery
Check price
SUIZAN Replacement Blade for Dozuki Dovetail Saw 240mm Rip Cross Angle Cut | Professional Pull Saw for Woodworking Joinery Tenon Furniture Making DIY Tools Fine Wood Miter Cut Sharp Replaceable Blade
JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion.
free delivery
Check price
GEDORE Tool set, 6-pc. set, Complete, in PVC holder, Chisels, Centre punch, Driver, Tool case, 106
VERSATILE USE: The 6-piece tool set is basic equipment in any workshop.
free delivery
Check price
Stubai 104305 Air-Hardened Cross-Cut Chisel, Silver/Red, 500 mm
High alloyed and lacquered
free delivery
Check price
Kakuri 19mm Japanese Hybrid Chisel with Long Blade, Red Oak Handle
KaKUrI
free delivery
Check price
Rennsteig 321 300 1 Painted Crosscut Chisel with Handguard, Gold/Red, 300 mm
Weight: 705G
free delivery
Check price
Ega Master 62880 - Crosscut Chisel 8 X 200 Mm with Handle
Ega-Master
free delivery
Check price
NS Cross Cut Chisel Al-BR 150
Crafted from high‐strength aluminum bronze, providing durability and resistance to corrosion.
free delivery
Check price
Ega Master 73779 - Cross Cutting Chisel 140 Mm Non Sparking Al.Bron.
Hydraulic equipment and lift
free delivery
Check price
Bahco NS604-200 Aluminium Bronze Cross Cutting Chisel, Gold, 200 mm
Cross cutting chisel, for creating grooves and slots Allows spark-free operation Length: 200mm
free delivery
Check price
20mm Premium Polished Bevel Edge Chisel
The Premium Mortise Chisel Haben Einen Improved Cross Section The Blade The Blades Are Polished The Ergonomic white beech handle is strong enough to withstand heavy blows The blades are traditionally forged from Cr-Mn steel and heat treated to 59 HRC with
free delivery
Check price
IRWIN 10505173 M500 Bevel Edge All-Purpose Chisel with Striking Cap Set (4-Piece)
Set includes four (4) chisels, one each in the following sizes: 1/4-Inch, 1/2-Inch, 3/4-Inch and 1-Inch.
free delivery
Check price
Ega Master 73781 - Cross Cutting Chisel 200 Mm Non Sparking Al.Bron.
Hydraulic lifting equipment and
free delivery
Check price
Bahco NS604-300 Aluminium Bronze Cross Cutting Chisel, Gold, 300 mm
Cross cutting chisel, for creating grooves and slots Allows spark-free operation Length: 300mm
free delivery
Check price
Beta 12620156 Model 1262 PH3 E8 Screwdrivers for Cross Head Phillips Screws with Hexagon Bolsters, Ph3
For Cross Head Phillips Screws
free delivery
Check price
Stubai 103415 Chrome Vanadium Steel Cross Cut Chisel, Red/Silver, 250 mm
High alloyed and lacquered
free delivery
Check price
Rennsteig 320 250 1 DIN 6451 Crosscut Chisel, Gold/Silver, 250 x 23 x 13 mm
Rennsteig
free delivery
Check price
16mm Premium Polished Bevel Edge Chisel
The blades are traditionally forged from Cr-Mn steel and heat treated with up to 59 HRC. The blades are polished.
free delivery
Check price
S&R SDS-Plus Gouge Chisel Bit 14x250x22mm for Concrete Channelling | High-carbon steel hollow chisel for masonry, brick and stone, fits SDS chisel sets, ideal plugging chisel for concrete
CUTS CLEAN CONCRETE CHANNELS: SDS-Plus gouge chisel bit with a hardened hollow profile removes ragged, inaccurate grooves, delivering accurate channels for cable and pipe runs in one controlled pass, cutting rework on site
free delivery
Check price
Rennsteig 320 200 1 DIN 6451 Crosscut Chisel, Gold/Silver, 200 x 20 x 12 mm | 8 x 200 mm, painted
Rennsteig
free delivery
Check price
12mm Premium Polished Bevel Edge Chisel
The blades are traditional made from chrome MN steel forged and with to 59 HRc heat treated The blades are polished The premium ripping chisel have an improved Cross Section of blade The ergonomic White beech wood handle is strong enough to withstand heavy shock
free delivery
Check price
S&R Chisel, Pin Punch and Center Punch Set with Ergo Handle, 5-pcs. | Made in Germany, made of chrome-vanadium steel
Chisel and Pin Punch set - 5pcs. made of forged and heat-hardened chrome-vanadium tool steel
free delivery
Check price
OREGON 73LPX064E Chain, 3/8-inch Pitch, 64 Drive Links
Super 70 chisel chain is benchmark 3/8 inches chain for the professional users X grind geometry Top performing square-corner chisel cutters Bumper drive links reduce kickback Vibe-Ban chassis design reduces vibration 25% or more at the handles
free delivery
Check price
10mm Premium Polished Bevel Edge Chisel
The Premium Mortise Chisel Haben Einen Improved Cross Section The Blade The Blades Are Polished The Ergonomic white beech handle is strong enough to withstand heavy blows The blades are traditionally forged from Cr-Mn steel and heat treated to 59 HRC with
free delivery
Check price
Faithfull HSS Woodturning Chisel Set of 8 in Wooden Box | HSS Woodturning Chisels, Walnut Handles, Brass Ferrules, Polished Blades, 8-Piece Set with Wooden Storage Box
High Speed Steel Blades for Long-Lasting Performance – Manufactured from High Speed Steel, the blades maintain a sharp cutting edge for longer than carbon steel equivalents, reducing sharpening frequency and helping deliver consistent cutting performance when working with hard and soft woods.
free delivery
Check price
Ega Master 62881 - Crosscut Chisel 23 X 13, 250 Mm with Handle
Special tools for the workshop
free delivery
Check price
Estwing E-5 9-inch Sure Split Wedge with 1-0.875-inch Cutting Edge
Fast taper head for easy starting Fins permit extra wedge action Sledge will continue through out below the woodline for sure splitting
free delivery
Check price
6mm Premium Polished Bevel Edge Chisel
The blades are traditional made from chrome MN steel forged and with to 59 HRc heat treated The blades are polished The premium ripping chisel have an improved Cross Section of blade The ergonomic White beech wood handle is strong enough to withstand heavy shock
free delivery
Check price
Ega Master 62882 - Crosscut Chisel 23 X 13, 300 Mm with Handle
Special tools for the workshop
free delivery
Check price
SDS-Plus Chisel Set 4 Pieces Tile Chisel 40 x 250 Flat Chisel 40 x 250 Flat Chisel 20 x 250 Pointed Chisel in Practical Rotating Box for Commercial Use
INK. Tile chisel - The angled head, as well as the practical cutting width of 40 mm, makes it easier to remove tiles and tile adhesive on wall and floor surfaces.
free delivery
Check price
WEDO Non-sparking Cross Chisel, Spark-free Safety Cross-Cut Chisel, Beryllium Copper, DIN Standard, BAM & FM Certificate, 20x200x8mm
High quality Raw Materials: Beryllium Copper Non-Sparking Cross Chisel are Made of Expensive and Rare non-ferrous metal in good proportion.
free delivery
Check price
7-Piece Set. SDS Plus Concrete Drill Bit Set Double Cross Head + Concrete Drill Chisel
Professional 11 pieces. SDS Plus drill bit set - in a practical case - all drills with double cross head +
free delivery
Check price
WEDO Non-sparking Cross Chisel, Spark-free Safety Cross-Cut Chisel, Aluminum Bronze, DIN Standard, BAM & FM Certificate, 20x200x8mm
High quality Raw Materials: Aluminum Bronze Non-Sparking Cross Chisel are Made of Expensive and Rare non-ferrous metal in good proportion.Surface Color:Silver Yellow. Appropriate for operation with ethylene concentration below 8% Standard Code GB ExIIB. Non-magnetic. Hardness: 20-30 HRC.
free delivery
Check price
Roughneck ROU31973 Cold Chisel Set - 3 Piece Including: 16x200mm, 19x250mm, 25x300mm with Canvas Tool Roll, Multi
Cold Chisel 3 Piece Set 200mm, 250mm and 300mm Product code: 31-973 Length: 5.5cm Width: 3.5cm Height: 31.7cm
free delivery
Check price
Martin 153FGB Curved Cross Chisel Hammer, Fiberglass Handle, Round face 1 9/16 ", Chisel 3 ", Weight .85 pounds
Round face -- 19?16? diameter.
free delivery
Check price
Trend FastTrack Taper Roughing Stone, 100 Grit, 2.5 Degree Taper, Monocrystalline Diamond, FTS/TS/R, Grey
REPLACEMENT STONE: Official Trend FastTrack stone with colour-coded grey ABS base and numerical grit identification for easy selection; maximise your honing and reshaping capabilities.
free delivery
Check price
LEBAHAN SDS Plus Chisel Set, 4-Piece SDS Plus Tile Chisel, 1 x Pointed, 1 x Flat, 2 x Tile Chisels, Professional for All SDS Plus Impact and Rotary Hammers
【Strong and Sturdy】Lebahan tile chisels are made of high quality hardened alloy steel with advanced forging process and surface treatment technology. The product includes a pointed chisel, a flat chisel and 2 tile chisels.
free delivery
Check price
VASTOOLS Welding Chipping Hammer with Coil Spring Handle,10.5",Cone and Vertical Chisel, Cone and Cross Chisel, 10" Wire Brush
High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length.
free delivery
Check price
Big Horn 19874 Flat Face and Cross-Peen Goldsmith's Hammer w/Wooden Handle 11-1/2 Inch Long for Riveting Chisel Metal Forming Jewelry Making Tool
Ideal for flattening and planishing, and the reverse side used in forming, riveting, and texturing
free delivery
Check price
STANLEY FATMAX 25mm Carbon Steel Blade Side Strike Wrecking Chisel, FMHT0-16067
Sharpened side edge Hardened steel strike cap Carbon steel blade Steel core Bi-material handle
free delivery
Check price
Drill bit kit, Impact Chisel Drill Bit Tool Set Durable Round Handle Cross Electric Pickaxe Shovel Head for Hammer,for DIY
17-piece set includes impact chisels, drill bits and cross pickaxe shovel heads for electric hammers
free delivery
Check price
SUIZAN Dozuki Dovetail Saw 240mm Rip Cross Angle Cut - Professional Japanese Pullsaw Handsaw Woodworking Tools
JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cut through a pushing motion.
free delivery
Check price
Narex Czech Steel Professional Spoon Carving Gouge Chisel 20 mm 3/4 Wide 82280 by Narex
This professional spoon carving gouge is manufactured by highly respected cutting tool manufacturer in Czech Republic.
free delivery
Check price
Roughneck ROU31993 Bolster & Chisel Set - 3 Piece Including: Brick Bolster 102x216mm (4x8½in) Electrician’s Bolster76x279mm (3x11in) & x1 Cold Chisel 25x305mm (1x12in), Multi
Chisel and Bolster 3 Piece Set 76 x 254mm, 70 x 216mm, and 254 x 25mm Product code: 31-993 Length: 9.2cm Width: 28.4cm Height: 38.5cm
free delivery
Check price
Telescopic Ladder 3.8M/12.5FT Aluminium Extension Loft Ladder with Stabilizer Bar and Detachable Hooks, Multi Purpose Extendable Portable Ladders, 13 Steps
Premium Aluminum Ladder: Telescopic ladder is made of premium quality aluminum alloy, which is corrosion resistant, rust resistant, and long service life.
free delivery
Check price
STAHLWILLE Precision Engineered Accessory for Maintenance Crews for Superior Organization Including Ergonomic Design
DIN 6451, flat
free delivery
Check price
Roughneck Gorilla Pallet Buster | Heavy-Duty Demolition Pry Bar for Dismantling & Lifting Pallets, Floorboards, Paving Stones
Angled Double Claws - With a long handle and optimised angled claws, this robust pallet buster is designed to straddle joists and support blocks, offering superior leverage to make prying easier, while minimizing damage to valuable materials.
free delivery
Check price
Footprint Bolster and Cold Chisel Set - Essential Heavy Duty Hand Tools for Builders, Bricklayers and DIY. Fully Forged for Superior Strength. Use on Brick, Mortar, Plaster, Floor, Stone.
HEAVY-DUTY: Fully forged from one piece of Carbon steel heated to 1240°c gives superior strength. They're placed in a furnace at 850°c during the hardening process and then tempered to 240°c to decrease brittleness and increase longevity.
free delivery
Check price
STAHLWILLE Versatile Maintenance Tool for Precision Engineers to Create Permanent Bonds with Reinforced Construction
DIN 6451, flat
free delivery
Check price
WEDO Non-Sparking Flat Chisel Pointy Head,Cold Chisel,Beryllium Copper,4x6x140mm,Non-Magnetic,BAM & FM Certificate,Cone Chisel for Carpentry, Metalwork, Woodwork & Masonry Work
High quality Raw Materials: Beryllium Copper Non-Sparking Flat Chisel is Made of Expensive and Rare non-ferrous metal in good proportion.Surface Color:Silver Yellow. Appropriate for operation with ethylene concentration below 8% Standard Code GB ExIIB.
free delivery
Check price
STAHLWILLE Reliable Commercial Hardware for Advanced Workshops for Reliable Field Performance with High Heat Resistance
DIN 6451, flat
free delivery
Check price
Kosiy Narex Right & Left 6 mm 1/4" Skew Paring Chisels 811106/811156
Made by a small tool manufacturer in the Czech Republic
free delivery
Check price
Keewaki 19-Piece SDS Plus Drill and Chisel Set – Heavy Duty Rotary Hammer Drill Bit Set for Concrete, Brick & Masonry with Cross Tip Carbide SDS Drill Bits and Chisel Set with Storage Case
ALL-IN-ONE 19-PIECE DRILL & CHISEL SET: Includes 14 SDS drill bits and 5 chisels, providing everything you need for drilling, chiselling, or demolition on concrete, brick, and masonry.
free delivery
Check price
WEDO Non-Sparking Flat Chisel Pointy Head,Cold Chisel,Aluminum Bronze,4x7x200mm,BAM & FM Certificate,Cone Chisel for Carpentry, Metalwork, Woodwork & Masonry Work
High quality Raw Materials: Aluminum Bronze Non-Sparking Flat Chisel is Made of Expensive and Rare non-ferrous metal in good proportion.Surface Color:Silver Yellow. Appropriate for operation with ethylene concentration below 8% Standard Code GB ExIIB.
free delivery
Check price
Narex (Made in Czech Republic) Premium 8 pc set 6 (1/4), 8 (5/16), 10 (3/8) 12 (1/2), 16 (5/8) 20 (11/16) , 26 (1 1/16), 32 (1 1/4) mm Chisels w/ Hornbeam Handles by Narex
Made by a small tool manufacturer in the Czech Republic Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59 6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16"), 32 (1 1/4") mm Bevel ground at a 25 degree bevel.
free delivery
Check price
CYLBAQ SDS Plus Drill Bit Set, SDS-Plus Rotary Hammer Drill Bits, Masonry Bits + Cross Drill Bits(4 Cutting Edges) and Chisel Set, Concrete Drill with Carbide Tip for Brick Wall,Concrete,Stone,Cement
CYLBAQ
free delivery
Check price
WEDO Non-Sparking Flat Chisel Pointy Head,Cold Chisel,Aluminum Bronze,5x8x300mm,BAM & FM Certificate,Cone Chisel for Carpentry, Metalwork, Woodwork & Masonry Work
High quality Raw Materials: Aluminum Bronze Non-Sparking Flat Chisel is Made of Expensive and Rare non-ferrous metal in good proportion.Surface Color:Silver Yellow. Appropriate for operation with ethylene concentration below 8% Standard Code GB ExIIB.
free delivery
Check price
Mavaol Hammer Drill Bit Cross Blade 2-Helix for Concrete and Masonry, 40mm Diameter, 600mm Length Hand Tool
Versatile Compatibility: This premium hammer drill bit is designed for use with power tools and garden equipment, making it a practical addition to any toolbox for various applications.
free delivery
Check price
WEDO Non-Sparking Flat Chisel Pointy Head,Cold Chisel,Beryllium Copper,5x8x300mm,Non-Magnetic,BAM & FM Certificate,Cone Chisel for Carpentry, Metalwork, Woodwork & Masonry Work
High quality Raw Materials: Beryllium Copper Non-Sparking Flat Chisel is Made of Expensive and Rare non-ferrous metal in good proportion.Surface Color:Silver Yellow. Appropriate for operation with ethylene concentration below 8% Standard Code GB ExIIB.
free delivery
Check price
Rennsteig 320 300 0 Cross Chisel SB 300 mm
Rennsteig
Check price
GEDORE red Hammer and chisel set, 7-pc. set, Complete, Tool case for craftsmen, in Foam module, R22150019
VERSATILE USE: This hammer and chisel set is part of the basic equipment of every craftsman.
Check price
WEDO Non-Sparking Flat Chisel Pointy Head,Cold Chisel,Beryllium Copper,4x7x200mm,Non-Magnetic,BAM & FM Certificate,Cone Chisel for Carpentry, Metalwork, Woodwork & Masonry Work
High quality Raw Materials: Beryllium Copper Non-Sparking Flat Chisel is Made of Expensive and Rare non-ferrous metal in good proportion.Surface Color:Silver Yellow. Appropriate for operation with ethylene concentration below 8% Standard Code GB ExIIB.
free delivery
Check price
Rennsteig 320 250 0 SB SB Cross Chisel 250 mm
Rennsteig
Check price
bestarc Welding Chipping Hammer with Coil Spring Handle,Cross Chisel Vertical Chisel 9.5" Welding Wire Brush for Rust Slag Removal
High-quality materials: The chipping hammer is made of high carbon steel for outstanding strength and durability, making it ideal for quickly clearing slag from MIG, TIG, and ARC welds
free delivery
Check price
Rennsteig 320 300 0 Polished Crosscut Chisel, Gold, 300 mm
Rennsteig
Check price
Sheet Metal Hammer, 315mm Flat Cross Chisel for Car Auto Repair Tool Precision Metal Shaping High Carbon Steel Bodywork Professional Mechanics(square head)
[MULTIFUNCTIONAL AUTO BODY HAMMER] This 315mm sheet metal hammer is perfect for skilled metal shaping with its thoughtfully designed head configurations that include flat, square, and pointed options.
free delivery
Check price
Rennsteig 321 250 0 Polished Crosscut Chisel with Handguard, Gold, 250 mm
Rennsteig
Check price
WEDO Spark-free chisel, pointed chisel, explosion-proof, cross-section chisel, length 200 mm, aluminium bronze, BAM/FM/DIN standard
High-quality raw materials: aluminium bronze non-sparking cross cutting chisels are made of expensive and rare non-ferrous metal in good proportion.
Check price
Srliya Forklift Joystick Controller Forklift Joystick Handle Anti Aging Accurate Control 7919040095 Cross Joystick Controller for Linde R14 R16 R20 115
APPLICABLE MODEL: Joystick handle is suitable for Linde R14, R16, R20 115, R14SP, R16SP, R18SP 1123. Please confirm whether your model is applicable before buying.
free delivery
Check price
VRTYVEYBB SDS square shank hammer head for rotary hammers, chisels, and gas hammers, heavy duty, 83 mm, metal, suitable for flat, round, concave, and cross types, 19-33 mm
[WIDE TOOL COMPATIBILITY] This hammerhead fits various models, including electric hammers, pneumatic chisels and gas hammers, so you have the right tool for every task.
free delivery
Check price
CLLBANT 2-in-1 Screw Jig Adjustable Aluminum Cross Dowel Drill Guide Kit Woodworking Pocket Hole Jig for Bed Cabinet Screw Punch Locator
new, never used
free delivery
Check price
CLLBANT 2-in-1 Screw Jig Adjustable Aluminum Cross Dowel Drill Guide Kit Woodworking Pocket Hole Jig for Bed Cabinet Screw Punch Locator
new, never used
free delivery
Check price
Narex Czech Steel Individual Premium Woodworking Cabinetmakers Chisel with European Hornbeam Handle Sizes 6 8 10 12 16 18 20 26 30 32 40 and 50 mm 811606-811650 (4 mm -5/32")
Made by a highly respected edge tool manufacturer in the Czech Republic Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59 Available in sizes from 6 mm to 50 mm Bevel ground at a 25 degree bevel Handles made from waxed European Hornbeam and have a solid brass ferrul
free delivery
Check price
We have found a total of 132 cross chisels deals at amazon, ONBuy UK, Power Tools Direct, and other shops for you. The most popular brands include: Narex, Ega-Master, and WEDO. Today's offer is 12PCS SDS-Plus Drill Bit & Chisel Set, 8PCS Cross Hammer Drill Bits(6/8/10/12x150mm, 6/8x110mm) + 4PCS Concrete Chisels (14/20/40x250mm), Tungsten Carbide Tip for Concrete/Brick/Stone, Hex/Round Shank with 19% discount. The lowest price we found in our offers is £ 12.49 . The highest price in our price comparison is £ 292.09 . Currently, we have selected 23 reliable shops for you to buy cross chisels affordably.