Best choice
Oregon PowerSharp CS300 Chainsaw Chain 573268, Saw Chain with 3/8", .050" (1.3mm) Gauge, 56 Drive Links for 16-Inch Bar, Low Kickback Chainsaw Chains, Fits Oregon CS300, Qualcast YT4353-02 Chainsaws
Oregon PowerSharp chainsaw chain Pack of 1 replacement saw chain for 16-inch (40cm) long bar, designed specifically for chainsaws with on-board PowerSharp self-sharpening system
£ 32.99
Oregon Saw Chain and Guide bar - .325 Pitch, 0.58 inch (1.5mm), 72 Drive Links Chainsaw Chain and 18 inch (45cm) K095 Mount bar, for Al-ko, Alpina, Dolmar, Echo, Stiga and More
For chainsaw models that run .325 pitch, .058 Inch (1.5 mm) gauge, 72 drive links and 18 Inch (45cm) guide bar with K095 mount
Avalon Procut Chainsaw Chain .325 Gauge 050 1.3-72 Links and Square Tooth for 45cm Swords Approximately. Compatible with Husqvarna, Efco, Ryobi
Pack of 3 Square Tooth Chainsaw Chains for Wood Cutting
free delivery
OREGON PS56E 56 Drive Links Powersharp Chainsaw Chain
Recommended Petrol saws sizes 2.3hp (42cc) and smaller.
free delivery
25% discount
Oregon PS50E PowerSharp Chainsaw Chain with Sharpening Stone, 50 Drive Links
PowerSharp system allows the chain to sharpen in 3-5 seconds
£ 29.49 free delivery
Yweller Pack of 5 Saw Chains 3/8 Inch LP Pitch for 45 cm Blade - 62 Drive Links, 1.3 mm - Replacement Chain Compatible with Oregon 91P062X3, Bosch AKE45S, Greenworks GD80CS50, Husqvarna 120 Mark II
Optimal fit and length Specially designed for 45 cm blade length, with precise 3 8 inch LP chain pitch and 1.3 mm drive link thickness for stable running
free delivery
Recommendation
Kohnkdllc 3 Pack 18 inch 325 050 72dl Chainsaw Chains and 1 Guige bar Combo for Jonsered RedMax Mikita Husqvarna 350 351 353 346xp 455 550XP
18 inch chainsaw blade and guide bar combo kit for Dolmar models 112, 113, 114, 116, 116si, 117, 118, 119, 120, 120 Super, 120si, PS-510, PS-540, PS-5100S, PS-5105, PS-5105H, PS-6100, PS-6100H, PS-6800i.
free delivery
26% discount
ALM Manufacturing CH060 3/8-inch x 60-Links Chainsaw Chain Fits 45cm Bars
60 DRIVE links fits B&Q Pro chainsaw ranges
£ 21.53 free delivery
ISE Chainsaw Chain .325 1.3 (.050) 74 link Replaces 36900000074 Fits 18" Stihl bar 30030083317
74 Links
free delivery
Husqvarna X-CUT C83 18" 3/8" Pitch, .050 Gauge Chainsaw Chain
Includes one Husqvarna X-Cut C83 18 Inch Chainsaw Chain replacement compatible with the following Husqvarna chainsaw bar models 365, 372XP, 555, 562XP, 565 and 572XP
tallox 3 18 inch Chainsaw Chains .325 Inch Gauge .063 Inch Pitch 74 Drive Links fits Stihl
fits MS 271 MS 261, MS 261 C-M, MS 261 C-MQ MS 291, MS 291 C-BEQ
Abroman 2 Pack S33 AdvanceCut 8 inch Chainsaw Chain 3/8" LP Pitch - .050" Gauge - 33 Drive Links Semi-Chisel Compatible with Chicago SWJ800E SWJ802E Sun Joe Harbor Freight 68862 Earthwise Greenworks
Chain is for 8 '', .050" Gauge, 3 8" LP Pitch, 33 Drive Links Semi-Chisel Low Kickback(The same saw can be equipped with different bar lengths. Please verify your parameters to ensure this chain works with your machine.)
8 Inch Chainsaw Chain 050" Gauge, 3/8" LP Pitch, 33 Drive Links, 8 Inch Chain Saw Chains Fits for Chicago Sun Joe SWJ800E SWJ806E Portland, Greenworks and More- S33 (3 Chains)
3 PACK 8 INCH CHAINSAW CHAINS This Chain is for 8 ''bar, .050" Gauge, 3 8" LP Pitch, 33 Drive Links Semi-Chisel Low Kickback. Please ensure this 8 inch chainsaw chains fit for your model before order.
Oregon AdvanceCut™ Saw Chain to fit 8-Inch Bosch, Ryobi, Mitox, Black & Decker, Blaupunkt , Titan Spear & Jackson, Einhell, Mac Allister, Gardenline Pole Saws, 33 Drive Links (91PX033E)
This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
free delivery
CHYHYR 3 Pieces 8 Inch Chainsaw Chain 33 Drive Links .050" Gauge, 3/8" LP Pitch, S33 Pole Saw Chain for 8-Inch Bar Compatible with Greenworks, Portland, Remington, Sun Joe, Kobalt and more
Replacement chainsaw chains for 8-Inch Bar 8 Inch Chainsaw Chain, S33, .050" Gauge, 3 8" Low Profile Pitch, 33 Drive Links. Please verify your parameters to ensure this chain works with your chain saw before buying.
UPFOREST 18 Inch Chainsaw Chain .325" Pitch, 063" Gauge, 68 Drive Links (22ELP68X1)
18 Inch Chainsaw Chain .325" Pitch, 063" Gauge, 68 Drive Links (22ELP68X1)
ZENTOP Carbide Chainsaw Chain 18 Inch, .325" Pitch, .050" Gauge, 72 Drive Links, Fits Husqvarna 440, 445, Poulan 4600, 4620, and More, 1 chain
Premium Carbide Alloy Quality Our carbide chainsaw chains are meticulously crafted from premium alloy and using advanced chrome-plating tech for extra durability. This crafting ensures our carbide blade super sharp and boosting the cutting prowess of our chains.
8TEN Full Chisel Chainsaw Chain 18 Inch .050 3/8 LP 62 DL for Echo CS-310 Poulan Woodshark Craftsman
Replaces OEM Part Numbers Echo 91PX62CQ; For Husqvarna 585422162, S93G-62, 501 84 70-62, H35-62, 576 93 65-62, H37-62, Y62, For Stihl 3636 005 0062, 63PM362E, 3613 005 0062, 63PM62E; TriLink
Yeerch 8 Inch Chainsaw Chain 3/8" LP Pitch .050" Gauge 33 Drive Links, Premium 8 Inch Chain Saw Chains Fits for Portland, Greenworks, Kobalt, Remington, Sun Joe and More (3 Chains, Semi-Chisel)
Efficiency & Safety The 8-inch Replacement Chain comes with protective oil. Tough materials and professional technology make the chain have a high efficiency cutting. Yeerch low-kickback saw chain meets the kickback performance requirement of ANSI OPEI B175.1-2012 when tested according to the provisions of ANSI OPEI B175.1-2012, which ensures safety during use.
Oulisen 8 Inch Chainsaw Chain 3/8" Low Profile Pitch, 050" Gauge,33 Drive Links S33 Low Kickback Pole Saw Chain Fit For Greenworks Poulan Wen Sun Joe SWJ800E SWJ806E (2 Chains)
Oulisen 8 Inch Chainsaw Chain 3 8" Low Profile Pitch, 050" Gauge,33 Drive Links S33 Low Kickback Pole Saw Chain Fit For Greenworks Poulan Wen Sun Joe SWJ800E SWJ806E (3 Chains 2 Files)
S33 8 inch Chainsaw Chain 3/8" LP Pitch - .050" Gauge - 33 Drive Links Semi-Chisel Fits Chicago Sun Joe SWJ800E SWJ802E Sun Joe Harbor Freight 68862 Earthwise Greenworks
Ameri
2 Pack 18Inch Chainsaw Chain 325" Pitch, 058" Gauge 72 Drive Links Blade Replacement, Low Vibration & Low Backlash Compatible with Stihl, Blue Max, Oregon and More
2-Pack 18" Chain 325" Pitch .058" Size 72 Drive Links, Please check the length and drive links to make sure this 18" Chain is suitable for your machine. Suitable for most 18" bar saws.
30% discount
Oregon Chain 325 1.5 VM with Safety 21LPX078E
Model Number 21LPX078E
£ 28.49 free delivery
Oregon 3-Pack Pole Saw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 10" (25cm) Bar, 40 Drive Links – Low-kickback Chain Fits Black & Decker, Bosch, Ferrex, Worx and more
This pole saw chain is for saw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 40 drive links, 10" (25cm) bar and fits pole saws up to 42cc - DOUBLE CHECK THE POLE SAW MANUAL & VERIFY THE FIT
free delivery
Oregon S33 AdvanceCut 8-Inch Chainsaw Chain Fits Chicago, Earthwise, Greenworks, Sun Joe, 8", Grey
Power Source Type Manual
free delivery
Three Rotatech Chain Compatible with Stihl RMC 3652 000 0066 - Chainsaw for 3/8"(1.6 mm) Chainsaw 66 Rings, 45 cm, Chisel-Chamfer Sharp
Rotatech
Perfect Garden 3x saw chain 45 cm, 1.3 mm, 3/8 inch, 62 TG suitable for Stihl Husqvarna Fuxtec Einhell Florabest Grizzly chainsaw
Cutting length 45 cm (18") (measured when installed, from blade tip to machine stop)
Avalon Procut Chainsaw Chain 325 050-1.3 Round Tooth (76 Links)
325 0.5"-1.3mm
Yeerch 18 Inch Chainsaw Chain 3/8" LP Pitch, .050" Gauge, 62 Drive Links, Fits for Poulan, Kobalt, Echo, Ego, Greenworks and More 18" Saw Chain (3 Chains, Semi-Chisel)
Efficiency & Safety The 18" chainsaw chain comes with protective oil. Tough materials and professional technology make the chain have a high efficiency cutting. Yeerch low-kickback saw chain meets the kickback performance requirement of ANSI OPEI B175.1-2012 when tested according to the provisions of ANSI OPEI B175.1-2012, which ensures safety during use.
Molten. 8 Inch Chainsaw Chain 3/8 .050 33DL Replacement for Sun Joe SWJ800E SWJ806E Pole Saw Polesaw, Greenworks 20302 20192, Portland 62896, Wen 4019, Oregon S33 (3 Chains)
This chain is compatible with the following models WEN 4019, Portland 62896; Chicago 68862; Earthwise CPS40108, CPVS41008, LPS40208, PS40008; Remington RM4050, RM4050B; Poulan PPB40PS
free delivery
2 x Saw Chain 35cm / 1.3mm / 3/8" / 52 TG Compatible with Oregon 91P052X / 91P052E / 91PX052X
Cutting length 35 cm (14")(measured from guide bar tip to place where chainsaw housing starts)
Rotatech Chainsaw Chain .325 Inch, 1.3 mm, 72 Drive Links, 45 cm Sword
0.325 PITCH, 1.3mm GAUGE, 72 DRIVE LINK CHAIN TO FIT A 18 (Inch) BAR
15% discount
Oregon PowerCut 3/8" Pitch, .058" (1.5 mm) Gauge Full Chisel Chainsaw Chain for 20 Inch Bar - 72 Drive Links - fits Husqvarna, Makita, Dolmar, Jonsered, and more (22LPX)
This saw chain's bumper drive links reduce kickback, ideal for cutting hardwood and seasoned timber
£ 29.39 free delivery
Oregon 90PX052E 3-Pack AdvanceCut Chainsaw Chain for 14-Inch (35cm) Bar -52 Drive Links – fits Bosch, Karcher, Husqvarna, Makita and more
Fits these chainsaw models Bosch AKE35-19S, Karcher CS330BP, Husqvarna 436Li, 536Li, Makita DUC353, DUC3541 and more
free delivery
Perfect Garden 2x saw chain 45 cm, 1.3 mm, 3/8 inch, 62 TG suitable for Stihl Husqvarna Fuxtec Einhell Florabest Grizzly chainsaw
Cutting length 45 cm (18") (measured when installed, from blade tip to machine stop)
Oregon OEM 571037 Replacement Chain,powersharp 3/8 Low pro
Oregon chain,powersharp 3 8 low pro, part number 571037
free delivery
14% discount
Oregon 3-Pack Chainsaw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 16" (40cm) Bar, 56 Drive Links – Low-kickback Chainsaw Chain, Fits Titan, Ryobi, Black & Decker, Dolmar and more
The original pioneer and inventor of modern saw chain since 1947. Designed and engineered in the USA.
£ 29.99 free delivery
Perfect Garden 3X Saw Chain 45 cm 1.3 mm 3/8 Inch 62 TG Suitable for Matrix MCS 46-45, VARIOLUX V-BKS 45, Greenworks Pro 80 V Max Chainsaw
29% discount
Oregon 3-Pack Pole Saw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 10" (25cm) Bar, 40 Drive Links – Low-kickback Chain Fits Black & Decker, Bosch, Ferrex, Worx and more
This pole saw chain is for saw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 40 drive links, 10" (25cm) bar and fits pole saws up to 42cc - DOUBLE CHECK THE POLE SAW MANUAL & VERIFY THE FIT
£ 28.49 free delivery
Oregon 3-Pack Chainsaw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 18" (45cm) Bar, 62 Drive Links - Low-kickback Chainsaw Chain, Fits Husqvarna, Mac Allister, Bosch and more
This saw chain is for chainsaw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 62 drive links, 18" (45cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
free delivery
Oregon 3-Pack Chainsaw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 16" (40cm) Bar, 57 Drive Links – Low-kickback Chainsaw Chain, Fits Titan, Ryobi, Hawksmoor, Ferrex and more
This saw chain is for chainsaw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 57 drive links, 16" (40cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
free delivery
OREGON PS52E 52 Drive Links Powersharp Chainsaw Chain with Sharpening Stone
PS52E
free delivery
Oregon 3-Pack Chainsaw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 14" (35cm) Bar, 52 Drive Links – Low-kickback Chainsaw Chain, Fits Husqvarna, Ryobi, Bosch, Einhell, Dolmar, Ferrex and more
This saw chain is for chainsaw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 52 drive links, 14" (35cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
free delivery
Oregon AdvanceCut™ Saw Chain to fit 14-Inch Husqvarna, McCulloch, Ryobi, Bosch Chainsaws, 52 Drive Links (91PX052E)
Replacement Saw Chain needs an exact identification for each chainsaw and cannot be assumed based on the bar length or chain type.
21% discount
Oregon 90PX052E 3-Pack AdvanceCut Chainsaw Chain for 14-Inch (35cm) Bar -52 Drive Links – fits Bosch, Karcher, Husqvarna, Makita and more
Fits these chainsaw models Bosch AKE35-19S, Karcher CS330BP, Husqvarna 436Li, 536Li, Makita DUC353, DUC3541 and more
£ 33.99 free delivery
Oregon 3-Pack PowerCut Saw Chains for 18-Inch (45cm) Bar, 68 Drive Links, Low-Kickback Chain, Fits Several Stihl Models (V68X3)
This saw chain is for saw models that run .325 Inch pitch, .063 Inch (1.6 mm) gauge, 68 drive links and fits chainsaws between 38-62cc
free delivery
21% discount
Oregon PS55E PowerSharp Chainsaw Chain with Sharpening Stone, 55 Drive Links
Oregon PowerSharp replacement chain and sharpening stone For 16" (40cm) bar, 55 drive links, 3 8-inch pitch low profile and 0.050-inch (1.3 mm) gauge standard sequence cutting systems
£ 32.49 free delivery
8% discount
Oregon 2890486 21BPX078E Micro Chisel Chain 78th
Model number 21BPX078E
£ 27.09 free delivery
Oregon 32660P Chainsaw Sharpener Replacement Grinding Wheel 3/8".404" Pitch, 4 pcs
Resists burning of the cutters and leave a precision finish
free delivery
21% discount
Oregon PowerCut .325" Pitch, .063" (1.6 mm) Gauge Full Chisel Chainsaw Chain for 16 Inch Bar - 62 Drive Links - fits AEG and Stihl (22LPX)
Durable, low-vibration chain with exceptional speed and precision for faster, more aggressive cutting For chainsaw brands 38-62 cc - .325" pitch, .063" (1.6 mm) gauge, 62 drive links
£ 20.39
Oregon PowerCut 3/8" Pitch, .063" (1.6 mm) Gauge Full Chisel Chainsaw Chain for 18 Inch Bar - 66 Drive Links - fits AEG and Stihl (75EXL)
This saw chain's bumper drive links reduce kickback, ideal for cutting hardwood and seasoned timber
free delivery
25% discount
Oregon 90PX056E AdvanceCut Chainsaw Chain for 16-Inch (40cm) Bar -56 Drive Links – fits Makita, Dolmar, Sterwins and more
Fits these chainsaw models Makita EA 3202S, UC3020A, UC 4040A Dolmar ES-40A, PS-32, PS-36, PS-45 Sterwins 36 CS Li-2 "
£ 17.69
13% discount
Oregon Chainsaw Chain for 18-Inch (45 cm) Bar -62 Drive Links – Low-Kickback Chain fits Husqvarna & 3-Pack Pole Saw Chains for 10-Inch (25 cm) Bar - 40 Drive Links – Low-Kickback Chainsaw
Product 1 Stay focused on your music 24 pots, each with 300-degree motion and multicoloured LEDs, line up seamlessly with Ableton Live s mixer. Take hands-on control of sends, EQs, and any of your devices. Eight 60mm faders give high-precision control over your levels, and 16 multicoloured pads give you immediate track focus and mixer control.
£ 62.48
Oregon 91P050X3 3-Pack Chainsaw Chain for 14-Inch (35 cm) Bar -50 Drive Links – low-kickback chain fits several Stihl models
This saw chain is for chainsaw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 50 drive links, 14" (35cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
11% discount
Oregon 91P050X3 3-Pack Chainsaw Chain for 14-Inch (35 cm) Bar -50 Drive Links – low-kickback chain fits several Stihl models
This saw chain is for chainsaw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 50 drive links, 14" (35cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
£ 26.99 free delivery
17% discount
Oregon CS1500 Electric Chainsaw Sharpening Stone and Chain Replacement Kit
Package Dimensions 2.4L x 16.4H x 11.8W (centimeters)
£ 36.59 free delivery
Oregon V68 PowerCut Chainsaw Chain for 18-Inch Bar, 68 Drive Links, 325" Pitch, 063" Gauge, Fits Stihl (22LPX068G),Gray
Fits these chainsaw models with 18" bar Stihl 021, 025, 025C, 70, MS 230, MS 230 C, MS 230 C-BE, MS 241 C-M, MS 250, MS 250 C, MS 250 C-BE, WOOD BOSS MS 251, MS 251 C, MS 251 C-BE and more
free delivery
8% discount
Oregon Professional Chainsaw Sharpening Device, Compact 230-Volt Bench Grinder, Universal Chain Saw Sharpener, Electric, for All Chainsaw Chains (310-230), Red
Includes Grinder, a dressing brick and profile guide, operator instructions plus two grinding wheels (3.2mm and 4.7mm)
£ 59.99 free delivery
Oregon SpeedCut Chainsaw Chain - 78 Drive Links
95TXL chain .325" pitch, .050" 1.3mm gauge suitable for narrow kerf bars. Always use a SpeedCut chain in combination with SpeedCut or Micro-Lite bars.
free delivery
Oregon 3-Pack Pole Saw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 8" (20cm) Bar, 33 Drive Links – Low-kickback Chain Fits Einhell, Bosch, Black & Decker, Ryobi, Lux and more
This pole saw chain is for saw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 33 drive links, 10" (20cm) bar and fits pole saws up to 42cc - DOUBLE CHECK THE POLE SAW MANUAL & VERIFY THE FIT
25% discount
Oregon AdvanceCut Chainsaw Chain for 14-Inch (35cm) Bar -52 Drive Links – fits Bosch, Karcher, Husqvarna, Makita and more (90PX052E)
This Oregon chainsaw chain fits chainsaws up to 42cc.
£ 20.43
Three Genuine Rotatech Chainsaw Chain .325 1.5mm 78 Drive Links Equivalent to 21LPX078E
Rotatech
12% discount
Oregon Chain 3/8 H 1.3 HM with Thick (91PX062E)
Package Dimensions 2.4 L x 15.6 H x 8.8 W (centimeters)
£ 19.59
Oregon 91VXL045E 3/8-Inch Semi Chisel Chain Long Top with 45 Drive Links
X grind semi chisel chain
free delivery
2 x Saw Chain 45cm 1,3mm 3/8" 62 TG Compatible with Oregon 91PJ062X / 91PJO62X / 91P062X
Cutting length 45 cm (18")(measured from guide bar tip to place where chainsaw housing starts)
Oregon PowerCut 3/8" Pitch, .058" (1.5 mm) Gauge Full Chisel Chainsaw Chain for 18 Inch Bar - 68 Drive Links - fits Husqvarna, Makita, Dolmar, Alpina, and more (22LPX)
This saw chain's bumper drive links reduce kickback, ideal for cutting hardwood and seasoned timber
OREGON PS62E 62 Drive Links Powersharp Chainsaw Chain with Sharpening Stone
Oregon ToolPowerSharp System allows Oregon ToolPowerSharp Chain to sharpen in 3-5 seconds
free delivery
OREGON PS56E 56 Drive Links Powersharp Chainsaw Chain
Recommended Petrol saws sizes 2.3hp (42cc) and smaller.
free delivery
Oregon SpeedCut Nano Chainsaw Chain for 18” (45cm) Bar, .325" Low Profile Pitch, 1.1 mm Gauge, 70 Drive Links for Petrol & Electric Chainsaws, fits Makita Chainsaws
Oregon chainsaw chain for 18" bar This replacement saw chain is for chainsaw models that run .325 low-profile pitch, .043 Inch (1.1 mm) gauge, 70 drive links
free delivery
Oregon Q78 X-Grind Chainsaw Chain-0.325in. x 0.050in. fits 20in. Bar, Model Number Q78/20LPX078G, Grey
Top-Plate Filing Indicators make accurate sharpening easier
OREGON 542310 14-inch Powersharp Bar with Sharpener for 52 Drive Link Chain, Black
Package Dimensions 62.0 L x 4.0 H x 13.5 W (centimeters)
free delivery
Oregon 72LPX070G Super 70 Chisel Chain, 0.375 inch Gauge
Sold on Amazon
free delivery
Oregon 21BPX ControlCut Chainsaw Chain for 18-Inch (45cm) Bar -76 Drive Links – fits Stihl, Husqvarna, Parker, Efco and more
Fits these chainsaw models Stihl 25RM3, Husqvarna H25, Parker PCS-5800, PCS-6200, Efco KC250NK-K and more
Oregon Chain 3/8 Hours 1.3 HM-STG, 91PX050E
Package Dimensions 15.2 L x 3.8 H x 8.6 W (cm)
free delivery
Oregon S52X3 3 Pack Saw Chains
Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance
free delivery
Oregon Power Match 208RNDB083 Chain Saw Blade
The tip attaches with just one rivet and is held securely in place by wide, robust overlaps.
free delivery
Oregon 3-Pack PowerCut Saw Chains for 16-Inch (40 cm) Bar, 57 Drive Links, Low-Kickback Chain, Fits Makita, Alpina, Bosch, Dolmar, Echo, Efco, Einhell, Shindaiwa (T57X3)
3 x chainsaw chain 16 inch Universal 16" chainsaw chains, multi pack of 3, fits all chainsaw brands up to 42 cc - 3 8" Low Profile pitch, .050" (1.3 mm) gauge, 57 drive links
free delivery
RocwooD Archer Chainsaw Chain Fits Husqvarna 357XP 359 18" .325 .058 1.5 72DL x2
RocwooD
free delivery
Oregon Q106547 Chainsaw Sharpener Replacement Grinding Wheel, 3/8" Low Profile.325, 1/4" Pitch, 1 pc
Resists burning of the cutters and leave a precision finish
free delivery
Oregon Chain 0,325 Inch Pitch 1.3 MM Gauge, 20BPX064E HM with SG
Oregon
OREGON 20LPX078G 78 Drive Link Super 20 Chain, 0.325-Inch
Blued Cutters deliver high-quality protection against corrosion
Oregon VersaCut 3/8" Low Profile Pitch, .050" (1.3 mm) Gauge Semi-Chisel Chainsaw Chain for 14 Inch Bar - 52 Drive Links - fits Husqvarna, Makita, Dolmar, Einhell, Echo, and more (91VXL)
The low-vibration Semi-Chisel cutters are designed to work through wood with exceptional speed, and promise a higher tolerance to sharpening errors compared to chisel cutters
£ 16.52 free delivery
Oregon ControlCut Chainsaw Chain for 18-Inch (45cm) Bar -72 Drive Links – fits Husqvarna, Hyundai, Alpina, Efco and more (21BPX072E)
Micro Chisel cutters with small-radius working corners for excellent performance in hardwood and easy maintenance.
free delivery
Oregon 91PX045E AdvanceCut Chainsaw Chain for 12-Inch (30 cm) Bar -45 Drive Links – low-kickback chain fits Dolmar, Echo, Bosch, Einhell and more
Fits these chainsaw models Dolmar PS-32, PS-33, PS 340, PS-344, PS-350, PS-400 Echo CS-310, CS-400, ECS-200, ECS-3050 Einhell EK1540, KSE1640, PES 1840, PE S300, PKS 1840 and more
free delivery
Oregon 3-Pack Pole Saw Chains for 8-Inch (20 cm) Bar and Universal Sharpening Kit -33 Drive Links, Low-Kickback Chain fits Bosch, Black & Decker, Ryobi and More (91P033X3)
Fits these pole saw models Bosch UniversalChain18, Grizzly BKS25L, EKS710T, Ryobi ONE+ OPP1820, Mac Allister HKPCS06D05-X, Titan TTL650GDO and more
Oregon 91VXL045E 3/8-Inch Semi Chisel Chain Long Top with 45 Drive Links
X grind semi chisel chain
Oregon Chain 0,325 Inch Pitch 1.3 MM Gauge, 20BPX072E HM with SG
Oregon
RocwooD Archer Chainsaw Chain Fits Husqvarna 350 445E 450E 18" .325 .050 1.3 72DL
Oregon Chainsaw Chain for 14-Inch (35 cm) Bar -50 Drive Links – low-kickback chain fits several Stihl models
Fits these chainsaw models Stihl 010, 011, 018, MS 201, MS 201 T, MS 210, MS 210 C, MS 230, MS 230 C, MS 211, MSA 220 and more - Make sure to check compatibility before purchasing
free delivery
Oregon Chain 3 / 8 Inch 1.3 MM 53 Tg HM 91 VXL053E, without SG
Package Dimensions 15.2 L x 3.8 H x 8.8 W (cm)
Oregon Powersharp Saw Chain Self-Sharpening Starter Kit - 3/8" Low Profile, 0.50 inch (1.3mm), 56 Drive Links Chainsaw Chain and 16 inch (40cm) A041 Mount bar for Husqvarna, Makita, Ryobi and More
Lightweight, easy to maneuver guide bar for occasional woodcutters using small electric and gasoline powered chain saws
Oregon Chainsaw Chain Fits Stihl, Mini Chainsaw Chain for 14-Inch (35cm) Guide Bar, 1/4" Low Profile Pitch, 72 Drive Links, 1.1mm Gauge, Low-Kickback, Semi Chisel Cutters, Fits Stihl Models (24AP)
This premium Oregon chainsaw chain is suitable for saw chain models that run a 14 inch bar, 1 4 inch low-profile pitch, .043 Inch (1.1 mm) gauge, 72 drive links
free delivery
OREGON PS50E 50 Drive Links Powersharp Chainsaw Chain with Sharpening Stone by OREGON
OREGON PS50E 50 Drive Links Powersharp Chainsaw Chain with Sharpening Stone
free delivery
Oregon 3-Pack Chainsaw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 16" (40cm) Bar, 57 Drive Links – Low-kickback Chainsaw Chain, Fits Titan, Ryobi, Hawksmoor, Ferrex and more
This saw chain is for chainsaw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 57 drive links, 16" (40cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
free delivery
9% discount
Oregon AdvanceCut™ Saw Chain to fit 14-Inch Husqvarna, McCulloch, Ryobi, Bosch Chainsaws, 52 Drive Links (91PX052E)
Replacement Saw Chain needs an exact identification for each chainsaw and cannot be assumed based on the bar length or chain type.
£ 16.39
Oregon 3-Pack Chainsaw Chain for 14-Inch (35 cm) Bar & Biodegradable Chain Oil -50 Drive Links, Low-Kickback Chain fits Several Stihl Models (91P050X3)
Fits these chainsaw models Stihl 010, 011, 018, MS 201, MS 201 T, MS 210, MS 210 C, MS 230, MS 230 C, MS 211, MSA 220 and more - Make sure to check compatibility before purchasing
£ 36.98
OREGON 3/8".050", 1.3MM Low-Kickback Consumer Chainsaw Chain for 12-inch/30cm Chainsaw bar 44 Drive Links
Recomends 5 32" (4.0mm) Oregon Toolround file for sharpening
£ 13.58 free delivery
Oregon 3/16Inch Unthreaded Chain Saw Sharpening Stones 3Pack 31396
Model number 31396
Oregon 90PX033E AdvanceCut Pole Saw Chain for 8-Inch (20cm) Bar - 33 Drive Links – fits Ryobi, Worx, Einhell and more
Fits these pole saw models Ryobi RPP720, RPP182015, RPP1820Li, Einhell GC-LC 1815 T, GE-EC 720T, BG-EC 620T, Worx WG349E, WG349E.9 and more
£ 10.79 free delivery
Oregon 7/32Inch Unthreaded Chain Saw Sharpening Stones 3Pack 31398
Outstanding flow and levelling properties allow easy application
Oregon VersaCut 3/8" Low Profile Pitch, .050" (1.3 mm) Gauge Semi-Chisel Chainsaw Chain for 14 Inch Bar - 50 Drive Links - fits Efco, Oleo Mac, and Stihl (91VXL)
The low-vibration Semi-Chisel cutters are designed to work through wood with exceptional speed, and promise a higher tolerance to sharpening errors compared to chisel cutters
£ 15.79
Oregon 91PX045E AdvanceCut Chainsaw Chain for 12-Inch (30 cm) Bar -45 Drive Links – low-kickback chain fits Dolmar, Echo, Bosch, Einhell and more
Fits these chainsaw models Dolmar PS-32, PS-33, PS 340, PS-344, PS-350, PS-400 Echo CS-310, CS-400, ECS-200, ECS-3050 Einhell EK1540, KSE1640, PES 1840, PE S300, PKS 1840 and more
£ 14.19 free delivery
OREGON 5.5mm (7/32-Inch) Chain Sharpening and Bar Maintenance Kit for 3/8-Inch Chainsaw Chain (558551)
One assembled file holder for chain top plate maintenance
free delivery
Oregon 3-Pack Pole Saw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 8" (20cm) Bar, 33 Drive Links – Low-kickback Chain Fits Einhell, Bosch, Black & Decker, Ryobi, Lux and more
This pole saw chain is for saw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 33 drive links, 10" (20cm) bar and fits pole saws up to 42cc - DOUBLE CHECK THE POLE SAW MANUAL & VERIFY THE FIT
free delivery
OREGON 7/32-Inch (5.5 mm) Chainsaw File and Holder with Angle Guides to Sharpen 3/8", .404" Chainsaw Chains (Q13252C)
Guide plate assists in maintaining accurate filing angle
Oregon DuraCut M91VXL Saw Chain for 30 cm bar, 44 Drive Links, 1.3mm, Compatible with Stihl
Increased durability for abrasive conditions
Oregon AdvanceCut 3/8" Low Profile Pitch, .043" (1.1 mm) Gauge Chamfer Chisel Chainsaw Chain for 14 Inch Bar - 50 Drive Links - fits Efco, Oleo Mac, and Stihl (90PX)
Durable, low-vibration chain with forgiving cutting performance for reduced fatigue during demanding work For chainsaw brands up to 42 cc - 3 8" pitch, .043" (1.1 mm) gauge, 50 drive links
Oregon AdvanceCut™ Saw Chain to fit 8-Inch Bosch, Ryobi, Mitox, Black & Decker, Blaupunkt , Titan Spear & Jackson, Einhell, Mac Allister, Gardenline Pole Saws, 33 Drive Links (91PX033E)
This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
OREGON 91P 60 Links 3/8'' 050 low-kickback Chainsaw Chain for 18''/45CM bar
91PX chain is intended for use with electric, or small gasoline-powered saws up to (42cc or less) with bars up to (45cm)
free delivery
Oregon Chain 3/8 Hours 1.3 HM-STG, 91PX050E
Package Dimensions 15.2 L x 3.8 H x 8.6 W (cm)
free delivery
Oregon Super 70 Chisel Chain 73LPX072G, 3/8Inch, 3/8" Pitch, .050" Gauge
Recommended saw size 50 to 100cc, bar length 16"-36" (41-91cm)
free delivery
OREGON 3/8", .050", 1.3MM Low-Kickback Consumer Chainsaw Chain for 16-inch/40cm chainsaw bar
Package Dimensions 15.4 L x 3.4 H x 8.8 W (cm)
£ 15.59 free delivery
11% discount
OREGON 7/32-Inch (5.5 mm) Chainsaw Chain Sharpening Round Files to Sharpen 3/8", .404" Saw Chains, 3 Pack (Q70507C)
Recommended for occasional chainsaw users who require small volumes of chain sharpening
£ 6.99 free delivery
Oregon 3-Pack Chainsaw Chain 3/8" LP Pitch, .050" (1.3 mm) Gauge for 18" (45cm) Bar, 62 Drive Links - Low-kickback Chainsaw Chain, Fits Husqvarna, Mac Allister, Bosch and more
This saw chain is for chainsaw models that run 3 8" low-profile pitch, .050" (1.3 mm) gauge (guide bar slot), 62 drive links, 18" (45cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
free delivery
7% discount
Oregon 91PX053E AdvanceCut Chainsaw Chain for 14-Inch (35 cm) Bar -53 Drive Links – low-kickback chain fits Echo, Solo, Sterwins and more
Fits these chainsaw models Echo CS-310, CS-400, ECS-150, S2600 Solo 600, 638, 6238, 6240, 606VA Sterwins 18594450, PCS38, PN3800 and more
£ 16.79 free delivery
Oregon Chain 3/8 1.6 VM with SG, 75LPX056E
Package Dimensions 15.4 L x 3.4 H x 8.8 W (cm)
free delivery
Oregon 91PX054E Low Kickback Chainsaw Chain - 54 Drive Links
1.3mm (0.50") Gauge
free delivery
Oregon DuraCut .3/8" Low Profile Pitch, .050" (1.3 mm) Gauge Micro Chisel Chainsaw Chain for 14 Inch Bar - 50 Drive Links - fits Stihl, Mc Culloch, Jonsered, and more (M91VXL)
The low-vibration Micro Chisel cutters have small radius working corners, designed to ensure a high standard of performance and easy maintenance
Oregon 91PX050E AdvanceCut™ Saw Chain to fit 14-Inch Stihl Chainsaws, 50 Drive Links
Replacement Saw Chain needs an exact identification for each chainsaw and cannot be assumed based on the bar length or chain type.
free delivery
Oregon PoweCut 75EXL PowerCut Saw Chain for 60 cm Blade with 84 Drive Links Full Chisel Suitable for Alpina, Stihl Chainsaws
For all chainsaw makes, which are equipped with a 3 8 inch pitch and a .063 inch 1.6 mm groove width. 84 drive links
£ 27.73 free delivery
Oregon 91PX049E Low Kickback Chainsaw Chain - 49 Drive Links
Lubrilink tie straps help keep oil where it is needed-on the chain
free delivery
OREGON 4.8mm (3/16-Inch) Chain Sharpening and Bar Maintenance Kit for .325-Inch Chainsaw Chain (558550)
One assembled file holder for chain top plate maintenance
£ 15.84 free delivery
OREGON 4.0mm (5/32-Inch) Chain Sharpening and Bar Maintenance Kit for 1/4", 3/8" Low Profile Chainsaw Chain (558488)
One assembled file holder for chain top plate maintenance
£ 15.59 free delivery
Oregon PowerSharp CS300 Chainsaw Chain 573268, Saw Chain with 3/8", .050" (1.3mm) Gauge, 56 Drive Links for 16-Inch Bar, Low Kickback Chainsaw Chains, Fits Oregon CS300, Qualcast YT4353-02 Chainsaws
Oregon PowerSharp chainsaw chain Pack of 1 replacement saw chain for 16-inch (40cm) long bar, designed specifically for chainsaws with on-board PowerSharp self-sharpening system
free delivery
Oregon 3/8" .043" (1.1mm) Gauge, 45 Drive Links, Micro-Lite, Narrow-kerf, Low-Kickback Chainsaw Chain for 12-inch/30cm Chainsaw bar
Recomends 11 64" (4.5mm) Oregon Toolround file for sharpening
free delivery
Oregon 22LGX PowerCut Saw Chain for 40 cm Blade with 62 Drive Links - Full Chisel Suitable for Stihl Chainsaws
For all chainsaw makes, which are equipped with a .325 inch pitch and a .063 inch 1.6 mm groove width. 62 drive links
Oregon B84 PowerCut Chainsaw Chain for 24" Bar, 84 Drive Links, 050" Gauge, 3/8" Pitch, 72EXL, Fits Husqvarna, Stihl Gray
Designed for professional woodcutters using 3 8" pitch saws, the Oregon B84 PowerCut Saw Chain is an 84 drive link, .050" gauge chain for 24" bars. This chain features low-vibration, full chisel cutters which quickly and precisely cut through timber.
Oregon 22LGX PoweCut Saw Chain for 40 cm Blade with 67 Drive Links - Full Chisel Suitable for Stihl Chainsaws
For all chainsaw makes, which are equipped with a .325 inch pitch and a .063 inch 1.6 mm groove width. 67 drive links
Oregon 91VG062E XTRAGUARD® Chainsaw Chain - 62 Drive Links - 3/8 inch Pitch - 0.050 inch / 1.3mm Gauge
oregon 3 8 1.3 chain with 62 drive links
free delivery
OREGON 21LPX 20 Replacement Chainsaw Chain Type 21/78 Drive Links / 0.058 Gauge (1.5mm) / 0.325 Pitch by OREGON
OREGON 21LPX 20 Replacement Chainsaw Chain TYPE 21 78 Drive Links 0.058 Gauge (1.5mm) 0.325 Pitch
free delivery
OREGON 542314 16-inch Powersharp Bar for 56 Drive Link Chain
Oregon ToolPowerSharp System allows Oregon ToolPowerSharp Chain to sharpen in 3-5 seconds
free delivery
OREGON 542311 14-inch Powersharp Bar with Sharpener for 50 Drive Link Chain
542311
free delivery
Oregon Chainsaw Chain Sharpening Wheel 3/8", .404" & .325"
Trade Prices
free delivery
Oregon PowerCut 3/8" Pitch, .063" (1.6 mm) Gauge Full Chisel Chainsaw Chain for 18 Inch Bar - 66 Drive Links - fits AEG and Stihl (75EXL)
This saw chain's bumper drive links reduce kickback, ideal for cutting hardwood and seasoned timber
